How do I clean the ice thickness probe on my Manitowoc?

Follow the cleaning procedure in the manual, which covers removing and cleaning the probe with an approved solution. Turn the machine off first and handle the probe gently, since bending it changes the cube thickness. If cubes are still wrong afterward, the probe gap or the control may need checking.

Should I replace the saddle valve feeding my ice maker in a NoDa cottage?

Saddle valves can clog or leak over time, and a plumber can replace one with a standard shutoff valve. We can tell you whether the valve is restricting water to your ice maker.

My ice maker in a Plaza Midwood townhome stopped after a cold night. What happened?

If the fill tube froze, water cannot reach the ice maker. It may also be a supply line in an exterior wall. We check the tube, the inlet valve and the freezer temperature.

Manitowoc Repair

Manitowoc Ice Maker Repair in NoDa & Plaza Midwood, NC

Manitowoc ice maker repair in NoDa & Plaza Midwood, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Sub-Zero Ice Maker Repair

Atosa Ice Maker Repair

Hoshizaki Ice Maker Repair

Traulsen Ice Maker Repair

Manitowoc Ice Maker Repair

MaxxIce Ice Maker Repair

Perlick Ice Maker Repair

Scotsman Ice Maker Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Manitowoc Ice Makers: What We Check First

A Manitowoc cube machine runs a cycle that depends on two small probes. The ice thickness probe sits near the evaporator face and signals the control when the ice slab has grown thick enough for water to bridge to it. The water level probe sits in the trough and tells the inlet valve when to stop filling. Between them, they decide how full the evaporator gets and when harvest starts. The water pump and distribution tube keep water flowing evenly over the nickel-plated evaporator.

Scaled ice thickness probe triggering harvest early, making thin cubes
Fouled water level probe causing short or overflowing trough fills
Clogged distribution tube leaving dry streaks on the evaporator
Recirculating condenser air lengthening freeze cycles in tight installations

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Manitowoc ice maker repair guide.

Water Supply Under Older Homes

In a mill cottage or bungalow, the refrigerator's water line often comes up through the floor from the crawl space. Old saddle valves, narrow tubing and fittings from earlier renovations can restrict flow, and a line exposed in a cold crawl space can freeze during a hard cold snap. When the ice maker gets too little water, cubes come out small or hollow, and production slows.

In newer townhomes, the supply is usually routed inside walls, and issues are more likely to be a clogged filter, a frozen fill tube or a faulty ice maker module. Door-mounted ice compartments on French-door models can also frost up and jam when their seal or fan falters.

Check the filter date, confirm the supply valve is open and make sure the ice maker is on. If the cubes taste stale, a filter change often helps too. The technician tests water pressure at the valve, the inlet valve and the module, and explains the repair before work.