How do I clean the ice thickness probe on my Manitowoc?

Follow the cleaning procedure in the manual, which covers removing and cleaning the probe with an approved solution. Turn the machine off first and handle the probe gently, since bending it changes the cube thickness. If cubes are still wrong afterward, the probe gap or the control may need checking.

Does well water in Clover shorten the life of a refrigerator ice maker?

It can, mainly by clogging the inlet valve screen and filter. Keeping the refrigerator filter fresh and having a sediment filter for the house helps a lot. If the valve does clog, it can be replaced.

Our Lake Wylie ice maker stops working every time we're gone for a while. Why?

Idle periods can let the fill tube freeze or the water valve stick. Check that the ice maker is turned on and clear old ice from the bin. If it keeps happening, we can test the valve and fill tube.

Manitowoc Repair

Manitowoc Ice Maker Repair in Clover & Lake Wylie, SC

Manitowoc ice maker repair in Clover & Lake Wylie, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Sub-Zero Ice Maker Repair

Atosa Ice Maker Repair

Hoshizaki Ice Maker Repair

Traulsen Ice Maker Repair

Manitowoc Ice Maker Repair

MaxxIce Ice Maker Repair

Perlick Ice Maker Repair

Scotsman Ice Maker Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Manitowoc Ice Makers: What We Check First

A Manitowoc cube machine runs a cycle that depends on two small probes. The ice thickness probe sits near the evaporator face and signals the control when the ice slab has grown thick enough for water to bridge to it. The water level probe sits in the trough and tells the inlet valve when to stop filling. Between them, they decide how full the evaporator gets and when harvest starts. The water pump and distribution tube keep water flowing evenly over the nickel-plated evaporator.

Scaled ice thickness probe triggering harvest early, making thin cubes
Fouled water level probe causing short or overflowing trough fills
Clogged distribution tube leaving dry streaks on the evaporator
Recirculating condenser air lengthening freeze cycles in tight installations

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Manitowoc ice maker repair guide.

Well water and clogged valves

Refrigerator ice makers on private wells around Clover depend on a small inlet valve with a fine screen. Sediment and iron collect there and slow the fill, so the ice maker makes fewer, smaller cubes or stops completely. Replacing the refrigerator's water filter is the first step, and a sediment filter for the house helps protect the valve.

If the filter is new and the ice maker is still slow, the valve screen may be clogged or the valve itself may be failing. A technician can measure the flow at the refrigerator and tell which one it is. Replacing the valve is a common repair, and flushing the line afterward keeps loose sediment from going straight into the new part.

Idle lake-house ice makers

An ice maker in a Lake Wylie home used only on weekends can freeze its fill tube or stick its water valve after sitting idle. When you arrive, check that the ice maker arm or switch is on and empty any old, fused ice from the bin. If the ice maker still does not cycle within a day, we test the valve, fill tube and module and quote the repair first.