My Hobart undercounter will not start when I close the door. What should I check?

First confirm the machine has power and the door is fully latched. A worn door interlock switch is a very common cause, as is a tank that has not filled enough to allow the cycle. We test both, plus the control, on site.

My dishwasher in a NoDa cottage tips forward when I open it. Is that dangerous?

It means the dishwasher is not anchored to the counter or cabinets. It can damage the door and hoses. We can secure it properly as part of a visit and check whether the tipping has caused leaks.

Why does my Plaza Midwood dishwasher leave standing water after a cycle?

A clogged filter, a kinked or overly long drain hose, a blocked disposal inlet or a failing drain pump are the usual causes. We test the pump and inspect the drain path to find which one it is.

Hobart Repair

Hobart Dishwasher Repair in NoDa & Plaza Midwood, NC

Hobart dishwasher repair in NoDa & Plaza Midwood, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hobart Dishwashers: What We Check First

Hobart dishwashers in restaurants and bars around Charlotte are mostly undercounter units and door-type machines, with conveyor models in larger kitchens. All of them follow the same rhythm: recirculate heated wash water from a tank through spinning arms, drain or overflow some of it, then hit the rack with a fresh final rinse that sanitizes either by heat or by chemical. A high-temperature machine adds a booster heater to make the rinse water hot enough.

Scale-coated booster element leaving the final rinse below sanitizing temperature
Door interlock switch worn out, stopping cycles midway
Fill solenoid sticking, causing a short tank fill and poor wash
Wash pump seal leaking water onto the dish room floor

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hobart dishwasher repair guide.

Retrofitted Dishwashers in Older Kitchens

Mill cottages and early bungalows were built long before dishwashers, so the one in your kitchen was added later, often in a tight spot with a long drain hose running to an old sink. A hose that kinks, sags without a high loop or connects to a clogged trap can leave standing water and smells. Some installations lack a proper anchor bracket, letting the dishwasher tip forward when the door opens.

Clean the filter in the tub bottom, run the disposal before starting, and check under the sink with the power off. A leak may drip into the crawl space unseen, so watch for soft flooring near the toe-kick or a damp smell from the vents below the house.

In newer townhomes and apartments, the dishwasher is more likely a recent model with sensor controls that may throw errors after power flickers. The technician tests the pump, valve and controls and checks the installation, explaining the price before work.