My GE top-loader fills and drains but won't spin. What's wrong?

The lid lock may not be confirming the lid is closed, or the drive or shift mechanism may have failed. A clogged drain can also prevent spin. We test the lock, drain and drive components to find the cause.

My upstairs washer in a South End townhome leaked through the ceiling. What should I check?

Shut off the supply valves and unplug the washer, then look for a split inlet hose, a loose drain hose at the standpipe, or water around the door boot. A drain pan under the machine can limit damage in the future. We will find the exact source before recommending a repair.

Why does my washer shake so much on my Dilworth bungalow floor?

Older floors framed over crawl spaces can flex under a high-speed spin, and worn shocks or springs make it worse. Leveling the feet properly and keeping loads balanced helps. If the shaking continues, the technician checks the suspension and drum bearings.

GE Repair

GE Washer Repair in South End & Dilworth, NC

GE washer repair in South End & Dilworth, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

GE Washers: What We Check First

GE's washers are mostly top-loaders, both agitator and impeller styles, with a smaller range of front-loaders under the GE and GE Profile badges and compact combo units for apartments. Many recent GE top-loaders use a direct-drive or belt-free motor setup and lock the lid during spin, and GE Profile models add features such as SmartDispense, which stores detergent in a bulk tank. Front-loaders use a door lock, boot seal and drain pump with filter.

Lid lock not confirming, washer refusing to spin
Drain pump clogged, water left in tub after cycle
Suspension rods or dampers worn, tub banging during spin
SmartDispense bulk tank clogged with thickened detergent

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our GE washer repair guide.

Top-Floor Laundry in Three-Story Townhomes

Many South End townhomes put the laundry room on the upper floor next to the bedrooms. That is convenient until a drain pump fails or an inlet hose splits, and water runs down into the ceiling of the floor below. Front-load washers in these homes also collect detergent residue and mildew in the door boot when summers turn humid, which can lead to odors and drain errors.

If the machine leaves water in the drum, check the drain pump filter at the bottom front with towels down. Look over the inlet hoses for bulges or cracks, and turn the supply valves off when you leave town for more than a few days.

Older Floors and Porch Laundry in Dilworth

Dilworth washers often stand on wood floors framed over a crawl space, or on a back porch enclosed long ago. A floor with some flex lets a spinning washer rock, which triggers balance errors and wears out shocks and suspension springs. The technician levels the machine, tests the pump, motor and suspension, and gives you the price before any repair.