Who made my Kenmore range?

Check the model number behind the storage drawer or on the frame. A 790 prefix usually means Frigidaire built it. That tells us which parts and diagnostics apply.

Will pulling out our slide-in range scratch the counters in our Steele Creek kitchen?

We take care to avoid it. Slide-in ranges sit tight against the counter edges, so the technician lifts and slides the range out slowly and protects the floor. If tile or trim makes removal risky, we discuss it before moving anything.

Our front-control range turns on by itself when we lean on it. Is that a fault?

Front controls can be bumped, which is why most models have a lock feature. Turn on the lock when the range is not in use. If burners or the oven come on with no contact at all, the control panel may be failing and should be tested.

Kenmore Repair

Kenmore Range Repair in Steele Creek, NC

Kenmore range repair in Steele Creek, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Range Repair

LG Range Repair

Whirlpool Range Repair

GE Range Repair

Maytag Range Repair

Bosch Range Repair

KitchenAid Range Repair

Frigidaire Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Ranges: What We Check First

Kenmore ranges were mostly built by Frigidaire, with the 790 prefix on the model number, though some came from other manufacturers over the years. They include freestanding and slide-in models in gas, electric coil, electric smoothtop and, on some newer models, induction. Many older Kenmore ranges are still running in homes across the area, often with simple mechanical controls.

Frigidaire-built gas bake and burner igniters wearing out
Coil burner receptacle or infinite switch failure
Electronic control board or touch panel failure on newer ranges
Discontinued Kenmore-specific knobs, boards or trim on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore range repair guide.

Slide-In Ranges and Warranty Timing

Builders in Steele Creek often install slide-in or front-control ranges that sit flush with the counters, giving a built-in look without a separate cooktop and wall oven. Because the controls sit up front and the range fits tightly between cabinets, a fault in the control board, oven sensor or a single element affects the whole appliance, and pulling it out takes care to avoid scuffing counters and flooring.

Common failures in the first several years include a touch panel that stops responding, an oven that will not hold temperature, a broken door hinge, and surface elements or igniters that quit. Since many of these ranges are young, confirm the manufacturer's warranty status before paying for a repair.

Reset the range at the breaker once after a storm. If it still acts up, we diagnose the fault, give you the price, and order any brand-specific parts with a clear timeline. Every repair carries our 90-day parts and 30-day labor warranty.