Our high-capacity front-loader in Waxhaw roars during spin. Is it repairable?

A roaring spin usually points to worn drum bearings, and on many front-loaders that repair is substantial because the tub has to come apart. On a newer or higher-end washer it can still make sense. We confirm the cause and give you a price so you can weigh it against replacement.

Do you fix washers in second-floor laundry rooms in Marvin homes?

Yes. Upstairs laundry is common in these houses, and we work there routinely. If there is any sign of a leak, shut off the water valves and unplug the machine until we arrive.

ProFix Appliance Repair Charlotte service van and technician in front of the Charlotte skyline

Home/Union County/Waxhaw & Marvin/Washer Repair

Washer Repair for Waxhaw and Marvin Households

Large households in Waxhaw and Marvin run big washers hard, often in a second-floor laundry room. We diagnose leaks, drain errors, odors and spin problems, then quote the repair before doing it. We cover ZIP 28173 in Waxhaw & Marvin.

1 ZIP

Coverage

Union County

90-Day

Parts Warranty

30-Day

Labor Warranty

Call (980) 588-8688 Book Online Now

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

Big Loads, Big Machines

High-capacity front-loaders and large top-loaders are common in these homes, and they tend to see a lot of towels, sports uniforms and bedding. Heavy, frequent loads wear drum bearings, shock absorbers and suspension springs, and the first sign is often a loud roar during spin or a machine that bangs and stops. Overstuffed loads also strain the drain pump and push water past the door boot.

Humidity adds to it. A front-loader that sits closed between washes grows mildew in the boot and dispenser, and the smell tends to get worse through July and August. Wipe the boot dry after the last load of the day and leave the door ajar.

Some homes on the rural fringe of the 28173 ZIP use private wells, where sediment can clog the screens at the hose connections and slow filling. If yours fills slowly, turn off the water and power before inspecting those screens. Our technician runs the washer through its cycles, tests the parts involved, explains the cause and prices the repair first.

Before You Book: Washer Checks

Safe first steps for the most urgent washer problems, and when to leave it to a technician.

Leaking WaterSafety: Turn off both supply valves behind the washer, unplug it, and look for drips at the hose connections and around the drain hose before running another load.
Overfilling with WaterSafety: Turn off both supply valves immediately and unplug the washer; if water still enters with the power off, the valve is stuck.
Burning Smell from WasherSafety: Turn the washer off, unplug it or switch off the breaker, and do not use it again until it is inspected.
Leaking from BottomSafety: Turn off the water, unplug the washer and check that the pump filter cap is tight if your model has one.

Symptoms, causes and repair-or-replace advice for every type of washer are in our complete washer repair guide.