My Kenmore washer fills but won't spin. What is wrong?

On Whirlpool-built top-loaders, a failed lid switch or worn drive coupler is a common cause. On front-loaders, a door lock or drain pump issue may stop the spin. Knowing the model prefix helps narrow it down.

Our high-capacity front-loader in Waxhaw roars during spin. Is it repairable?

A roaring spin usually points to worn drum bearings, and on many front-loaders that repair is substantial because the tub has to come apart. On a newer or higher-end washer it can still make sense. We confirm the cause and give you a price so you can weigh it against replacement.

Do you fix washers in second-floor laundry rooms in Marvin homes?

Yes. Upstairs laundry is common in these houses, and we work there routinely. If there is any sign of a leak, shut off the water valves and unplug the machine until we arrive.

Kenmore Repair

Kenmore Washer Repair in Waxhaw & Marvin, NC

Kenmore washer repair in Waxhaw & Marvin, Union County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Washers: What We Check First

Kenmore washers came from Whirlpool, LG and Frigidaire. The model prefix 110 usually means a Whirlpool-built top-load or front-load washer, 796 points to LG, and 417 to Frigidaire front-loaders. Top-load Kenmore washers from Whirlpool are especially common in older homes, and many are still running. Front-load Kenmore Elite washers were often LG-built. Laundry pairs from Sears were often sold as matched sets, so the dryer beside the washer may share the same maker and the same model prefix.

Lid switch failure on Whirlpool-built top-loaders stopping spin
Drive coupler worn on older direct-drive Kenmore top-loaders
Drain pump clogged on LG-built front-load Kenmore Elite washers
Front-load door boot mildew and bearing noise as machines age

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore washer repair guide.

Big Loads, Big Machines

High-capacity front-loaders and large top-loaders are common in these homes, and they tend to see a lot of towels, sports uniforms and bedding. Heavy, frequent loads wear drum bearings, shock absorbers and suspension springs, and the first sign is often a loud roar during spin or a machine that bangs and stops. Overstuffed loads also strain the drain pump and push water past the door boot.

Humidity adds to it. A front-loader that sits closed between washes grows mildew in the boot and dispenser, and the smell tends to get worse through July and August. Wipe the boot dry after the last load of the day and leave the door ajar.

Some homes on the rural fringe of the 28173 ZIP use private wells, where sediment can clog the screens at the hose connections and slow filling. If yours fills slowly, turn off the water and power before inspecting those screens. Our technician runs the washer through its cycles, tests the parts involved, explains the cause and prices the repair first.