Why is water sitting in the bottom of my Hotpoint dishwasher?

Most often it is a clogged filter or sump, a kinked drain hose, or a drain pump blocked by debris. On new installs, a disposal knockout plug left in place is a classic cause. We check the whole drain path before replacing the pump.

Our Tega Cay dishwasher has water sitting in the bottom after every cycle. What should I check?

Start with the filter assembly in the tub floor and the area under it. Then check the drain hose connection at the sink or garbage disposal, especially if the disposal was recently replaced and its knockout plug may still be in place. If those are clear, the drain pump or check valve may have failed, and that calls for a visit.

Is the builder-installed dishwasher in my Fort Mill house worth repairing?

Often, yes, when the fault is a pump, valve, latch or control board and the tub and racks are in good shape. If the tub is cracked or several parts are failing on a basic model, replacement may make more sense. We lay out both options with the price before any work.

Hotpoint Repair

Hotpoint Dishwasher Repair in Fort Mill & Tega Cay, SC

Hotpoint dishwasher repair in Fort Mill & Tega Cay, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hotpoint Dishwashers: What We Check First

Hotpoint dishwashers are basic built-in models from GE Appliances, usually with a plastic tub, front-mounted push-button controls and a single wash arm system fed by a circulation pump. They are common in rentals and builder-grade kitchens across the region. The parts list is short, which keeps repairs manageable, but the plastic tub and simple filtration mean these machines are sensitive to food debris and installation details.

Clogged filter or sump leaving dirty water after cycles
Drain pump jammed by glass, seeds or bone fragments
Inlet valve screen clogged so the tub underfills
Worn door latch switch preventing the cycle from starting

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hotpoint dishwasher repair guide.

Typical faults in subdivision kitchens

Many Fort Mill kitchens have a quiet, stainless-tub dishwasher with a manual filter in the floor of the tub. Those filters need rinsing every few weeks, and when they are ignored the machine leaves grit on glasses or sits with dirty water after the cycle. Twist the filter out, rinse it under the tap and check the sump beneath it for glass or seeds before calling.

Homes on York County municipal water, which is drawn from Lake Wylie and the Catawba, see fewer of the sediment problems common on rural wells. When dishes come out with a white film, rinse aid level and detergent choice are worth checking first. A dishwasher that will not fill at all points toward the inlet valve or a float switch stuck by debris.

Leaks, island installs and the repair visit

Dishwashers in kitchen islands sit over cabinet floors that hide a slow leak until the wood swells. If you notice soft toe-kick trim or a musty smell, switch off the dishwasher's breaker and close the supply valve under the sink. The technician pulls the unit, checks the door gasket, drain hose and pump, quotes the repair before touching it and reinstalls it level so the door seals evenly.