All my Dacor burners click when I turn one knob. Is that normal?

Yes, on many gas cooktops every igniter sparks together when any burner is lit, then stops once the flame is established. Constant clicking after the flame catches is not normal. That usually means moisture in a switch or a failing switch or module.

Can you still find parts for the old coil cooktop in my Rock Hill kitchen?

Often, yes. Coil elements, receptacles and infinite switches are fairly standard parts. We check availability for your model and tell you whether the repair is worth doing.

My glass cooktop in Rock Hill has one burner that won't heat. Is the whole top bad?

Usually not. A single dead zone is most often a failed element, limiter or switch, each of which can be replaced separately. We test the zone and quote the repair before starting.

Dacor Repair

Dacor Cooktop Repair in Rock Hill, SC

Dacor cooktop repair in Rock Hill, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Dacor Cooktops: What We Check First

Dacor builds cooktops in two very different technologies. The gas models use sealed burners with electronic spark ignition, often with lit control knobs, and they range from 30-inch units to wide professional-style rangetops. The induction models use copper coils under a glass surface, driven by power electronics that create a magnetic field to heat the pan directly. A clicking gas burner and a dead induction zone have almost nothing in common, so the first step is knowing which you own.

Moisture in a spark switch causing nonstop burner clicking
Cracked ceramic igniter leaving one gas burner unlit
Induction cooling fan blocked, triggering overheat shutdowns
Induction power board failure following a storm surge

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Dacor cooktop repair guide.

Old coils and newer glass tops

A built-in coil cooktop in an older Rock Hill home may still be doing its job decades on. When a coil stays cold, the culprit is usually the element, a burned receptacle or a failing infinite switch. Those parts are often still available, so a repair can make sense even on an older top.

Glass radiant and induction cooktops in newer neighborhoods fail differently. A single cold zone points to the element, limiter or a section of the control board, while an induction top that throws an error may be overheating because its cooling fan is blocked underneath. Never use a top with a cracked glass surface.

Before the technician arrives

Check the breaker first, especially after a summer storm. On a gas cooktop, clean and dry the burner caps and seat them properly. If you smell gas, leave the house and call the gas utility or 911 from outside. On the visit, we work from the cabinet below or lift the top from its cutout, and we explain the price before any repair.