My Hobart undercounter will not start when I close the door. What should I check?

First confirm the machine has power and the door is fully latched. A worn door interlock switch is a very common cause, as is a tank that has not filled enough to allow the cycle. We test both, plus the control, on site.

The dishwasher in our older Rock Hill kitchen leaks from the front. What causes that?

A worn door gasket, an unlevel install or the wrong detergent producing too many suds are the usual causes. Check that the unit sits level and use only dishwasher detergent. If it still leaks, we inspect the gasket, the tub and the door hinges.

Our rental dishwasher near downtown Rock Hill won't drain. Can you come while the tenant is home?

Yes. Many of these calls turn out to be a clogged filter or a blocked drain hose, which we can often clear on the spot. If the pump has failed, we quote the part to the owner before replacing it.

Hobart Repair

Hobart Dishwasher Repair in Rock Hill, SC

Hobart dishwasher repair in Rock Hill, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hobart Dishwashers: What We Check First

Hobart dishwashers in restaurants and bars around Charlotte are mostly undercounter units and door-type machines, with conveyor models in larger kitchens. All of them follow the same rhythm: recirculate heated wash water from a tank through spinning arms, drain or overflow some of it, then hit the rack with a fresh final rinse that sanitizes either by heat or by chemical. A high-temperature machine adds a booster heater to make the rinse water hot enough.

Scale-coated booster element leaving the final rinse below sanitizing temperature
Door interlock switch worn out, stopping cycles midway
Fill solenoid sticking, causing a short tank fill and poor wash
Wash pump seal leaking water onto the dish room floor

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hobart dishwasher repair guide.

Retrofits into older cabinets

Plenty of older Rock Hill homes had a dishwasher added during a kitchen update, sometimes into a space that was not built for one. Drain hoses run long distances to the sink, supply lines may be old, and the unit may not be anchored or level. Those details cause leaks at the door, kinked drains and water left in the tub after the cycle.

Start with the simple checks. Clean the filter in the bottom of the tub, run the kitchen tap until the water is hot before starting a cycle, and confirm the drain hose has a high loop under the sink. If water appears on the floor, turn off the dishwasher's breaker and the valve under the sink before anything else.

What a technician does on the visit

Rock Hill's municipal water comes from the Catawba system, so cloudy glasses are more often a rinse-aid or detergent issue than a sediment problem. When the machine itself is at fault, we test the drain pump, inlet valve, heater, float switch and controls. We tell you the cause and the price first, and if the tub or door frame is too far gone, we say that a replacement is the better call.