My Hobart undercounter will not start when I close the door. What should I check?

First confirm the machine has power and the door is fully latched. A worn door interlock switch is a very common cause, as is a tank that has not filled enough to allow the cycle. We test both, plus the control, on site.

My dishwasher in an older Kannapolis kitchen fills with sink water. Why?

The drain hose is probably missing a high loop or air gap, so water from the sink flows back into the dishwasher. We can correct the drain routing and check that the pump is not damaged. The price is given before we start.

Can you tell if a leak under my Kannapolis dishwasher has damaged the floor?

We can show you where the water is coming from and whether the subfloor looks wet or soft. Floor repair itself is a job for a contractor, but stopping the leak comes first. We quote the dishwasher repair before doing it.

Hobart Repair

Hobart Dishwasher Repair in Kannapolis, NC

Hobart dishwasher repair in Kannapolis, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hobart Dishwashers: What We Check First

Hobart dishwashers in restaurants and bars around Charlotte are mostly undercounter units and door-type machines, with conveyor models in larger kitchens. All of them follow the same rhythm: recirculate heated wash water from a tank through spinning arms, drain or overflow some of it, then hit the rack with a fresh final rinse that sanitizes either by heat or by chemical. A high-temperature machine adds a booster heater to make the rinse water hot enough.

Scale-coated booster element leaving the final rinse below sanitizing temperature
Door interlock switch worn out, stopping cycles midway
Fill solenoid sticking, causing a short tank fill and poor wash
Wash pump seal leaking water onto the dish room floor

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hobart dishwasher repair guide.

Retrofitted dishwashers in older kitchens

When a dishwasher is added to a compact mill-house kitchen, it often ends up in a cabinet space that was cut down to fit, with a drain line run over to the sink and a water line tapped off the sink supply. Those connections are where trouble starts: a drain hose without a high loop can let sink water back into the tub, and a loose compression fitting can drip quietly onto a subfloor over the crawl space.

If you see water under the dishwasher, turn off the water at the sink shutoff and the power at the breaker. Check that the filter in the bottom of the tub is clean and that the door gasket is not torn. A floor that feels soft near the dishwasher is worth pointing out when you book.

The technician checks the pump, inlet valve, door latch, heater and the installation itself. Newer homes on the edges of Kannapolis tend to have standard builder installs where a pump or control failure is the usual fault. Either way, you get the diagnosis and price before work.