Can you still get parts for my old Kenmore oven?

Common parts like igniters, elements and sensors usually match the original manufacturer and are easy to get. Some older Kenmore-specific control boards or knobs may be discontinued. We check availability before starting.

My Lancaster gas oven glows but won't light. What's wrong?

The igniter is probably weak. It glows but no longer draws enough current to open the gas safety valve, so the burner never lights. That is a common repair, and you should never try to bypass the igniter or valve yourself.

Is it worth fixing an older electric oven in Lancaster?

Often, yes. Elements and thermostats are usually available for older models. We check the overall condition and give you an honest recommendation.

Kenmore Repair

Kenmore Oven / Range Repair in Lancaster, SC

Kenmore oven / range repair in Lancaster, Lancaster County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Oven / Range Repair

LG Oven / Range Repair

Whirlpool Oven / Range Repair

GE Oven / Range Repair

Maytag Oven / Range Repair

Bosch Oven / Range Repair

KitchenAid Oven / Range Repair

Frigidaire Oven / Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Oven / Ranges: What We Check First

Most Kenmore ovens are part of a freestanding or slide-in range, and many were built by Frigidaire with a 790 model prefix. Kenmore also sold wall ovens and some ranges built by other manufacturers. Gas ovens use a hot-surface bake igniter to open the gas valve, electric ovens use bake and broil elements, and newer models add convection and electronic controls. Older Kenmore ranges often used a mechanical thermostat and clock, while newer ones moved to electronic control boards with touch panels.

Frigidaire-built gas bake igniter too weak to open the valve
Bake or broil element burned out on electric models
Oven temperature sensor drifting and causing uneven baking
Discontinued control boards limiting repairs on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore oven / range repair guide.

Older ovens and common failures

An electric oven that stops baking usually has a burned element, which often shows a visible blister or break. A gas oven that glows but never lights has a weak igniter. Thermostats on older ovens can drift and bake unevenly. Each is a reasonable repair on an oven that is otherwise in good shape.

Storms on rural lines can also affect newer ovens with electronic controls, since the surge when power returns may scramble the board. If the display goes blank or the oven ignores commands after an outage, switch its breaker off for a few minutes and back on. An oven that still will not respond after that reset has a control, sensor or relay problem worth testing.

Scheduling and the visit

Lancaster visits may be grouped into route days, so it helps to tell us the brand, the model number from the label inside the door or drawer, and exactly what the oven does. That improves the chance the technician arrives with the right element or igniter. On the visit we test the heating parts, the sensor and the control, explain the fault and quote the repair before doing any work.