My Dacor range burners work but the oven will not heat. Where do I start?

On a dual-fuel range the oven runs on 240 volts, so check its double breaker first and reset it fully. If power is fine, the bake element, sensor or a relay on the control board is likely. We test those directly rather than guessing.

Do you repair 48-inch pro-style ranges in Ballantyne?

Yes. We work on pro-style and dual-fuel ranges from all major brands. Some parts for these models are ordered rather than carried, and we tell you that up front along with the price.

After a storm, our slide-in range sparks but the oven will not heat. Could the storm be the cause?

Possibly. A surge when power returns can damage control boards and igniter circuits. Switch the range off at the breaker for a minute, restore power and try once. If it still fails, have the board tested rather than resetting it over and over.

Dacor Repair

Dacor Range Repair in Ballantyne & South Charlotte, NC

Dacor range repair in Ballantyne & South Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Range Repair

LG Range Repair

Whirlpool Range Repair

GE Range Repair

Maytag Range Repair

Bosch Range Repair

KitchenAid Range Repair

Frigidaire Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Dacor Ranges: What We Check First

A Dacor range is two appliances in one frame. On the dual-fuel models that are most common in this area, gas burners sit on top and an electric convection oven sits below, each with its own power and control circuits. Wider professional-style models may add a griddle or a second oven. Because the oven is electric and the top is gas, the range needs both a gas line and a 240-volt circuit, and problems can come from either side.

Half-tripped 240-volt breaker leaving the electric oven without heat
Convection oven sensor drifting, causing uneven or off-temperature baking
Control panel cooling fan failure damaging switches and boards
Surface burners clicking or failing to light on the gas side

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Dacor range repair guide.

Pro-Style and Dual-Fuel Ranges in Larger Homes

Some of the larger custom homes in Ballantyne and along the Providence corridor have pro-style ranges, often 36 or 48 inches wide, with sealed gas burners on top and an electric convection oven below. A dual-fuel range combines two systems in one appliance, so a single symptom can trace back to either side.

Typical problems include a burner that will not reignite, an oven slow to preheat because of a failing hidden element or convection fan, a temperature sensor giving bad readings, and a control board hit by a surge during summer storms. Slide-in ranges in remodeled kitchens add tight side clearances that make pulling the range out slower.

Pro ranges are heavy. Clear the floor in front, and share the brand and model when booking so parts questions can be answered early. If you smell gas, leave the house and call the gas utility or 911. We price the repair before starting and order brand-specific parts when they are not on hand.