Why do I need electricity for my Roper gas range to work?

The spark module that lights the burners and the glow-bar igniter in the oven both need household power. Without it, the oven will not light and the burners will not spark. During an outage, a burner can sometimes be lit carefully with a long match, but the oven will not run.

Do you repair 48-inch pro-style ranges in Ballantyne?

Yes. We work on pro-style and dual-fuel ranges from all major brands. Some parts for these models are ordered rather than carried, and we tell you that up front along with the price.

After a storm, our slide-in range sparks but the oven will not heat. Could the storm be the cause?

Possibly. A surge when power returns can damage control boards and igniter circuits. Switch the range off at the breaker for a minute, restore power and try once. If it still fails, have the board tested rather than resetting it over and over.

Roper Repair

Roper Range Repair in Ballantyne & South Charlotte, NC

Roper range repair in Ballantyne & South Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Range Repair

LG Range Repair

Whirlpool Range Repair

GE Range Repair

Maytag Range Repair

Bosch Range Repair

KitchenAid Range Repair

Frigidaire Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Ranges: What We Check First

The freestanding range is the Roper product most often found in rental kitchens across Mecklenburg and the surrounding counties. Electric models combine coil burners with a bake and broil oven, while gas models use spark-ignited burners and a glow-bar oven igniter. Both are built on basic Whirlpool designs with mechanical knobs and a small electronic or analog clock and oven control. Looking at the range as one appliance, rather than burner by burner, helps sort out faults that affect several parts at once.

Burned terminal block leaving the whole electric range dead
Loose gas range cord cutting power to spark and igniter
Worn oven door hinges and gasket leaking heat into the kitchen
Oven control fault on older Roper ranges with discontinued parts

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper range repair guide.

Pro-Style and Dual-Fuel Ranges in Larger Homes

Some of the larger custom homes in Ballantyne and along the Providence corridor have pro-style ranges, often 36 or 48 inches wide, with sealed gas burners on top and an electric convection oven below. A dual-fuel range combines two systems in one appliance, so a single symptom can trace back to either side.

Typical problems include a burner that will not reignite, an oven slow to preheat because of a failing hidden element or convection fan, a temperature sensor giving bad readings, and a control board hit by a surge during summer storms. Slide-in ranges in remodeled kitchens add tight side clearances that make pulling the range out slower.

Pro ranges are heavy. Clear the floor in front, and share the brand and model when booking so parts questions can be answered early. If you smell gas, leave the house and call the gas utility or 911. We price the repair before starting and order brand-specific parts when they are not on hand.