Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

Our induction cooktop in a renovated Davidson kitchen shuts off mid-cooking. Why?

Induction units shut down when they overheat, often because the cabinet below blocks their cooling fan or the fan has failed. Make sure the vents underneath are clear. If it continues, a technician can test the fan, sensors and power board.

Several burners on our Cornelius gas cooktop click but will not light. Is that one part?

Often it is a shared spark module, or moisture in the switches after a spill. Let the cooktop dry and check the caps. If clicking persists with no flame, a technician can test the module and igniters.

Roper Repair

Roper Cooktop Repair in Cornelius & Davidson, NC

Roper cooktop repair in Cornelius & Davidson, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Renovations and Lakefront Kitchens

When an older Davidson house gets a kitchen update, the cooktop is often set into a counter that was cut for a different model. A cooktop that sits unevenly, wiring crowded beneath it, or a glass top that cracks at a corner can trace back to that fit. Induction units added in renovations also need open airflow under the counter for their cooling fans.

Gas cooktops in larger Cornelius lake homes see heavy use when guests visit. Grease and boil-overs foul the igniters, and a weak spark module can make several burners click at once without lighting any of them. Large pots on oversized grates can also scorch knobs and switches mounted close to the burners.

Safe First Steps and the Visit

Turn off the breaker before cleaning an electric or induction top, and stop using one with a crack. On gas units, dry burner bases and seat the caps evenly; never adjust valves or lines. If you notice a gas smell, leave and call the gas utility or 911. We test switches, igniters, elements and boards and quote before repair.