Why does my AGA boiling plate lose heat so fast?

The plate draws on stored heat, and if the core temperature is low or the lid is often left open, it recovers slowly. A thermostat or heat source problem may be involved. We check the core temperature and controls.

My gas cooktop burner clicks constantly after a boil-over. How do I fix it?

Turn off the power, remove the cap and burner head, clean them and let them dry thoroughly, since moisture keeps the igniter sparking. Reseat the cap evenly. If it still clicks when dry, the igniter switch or spark module needs replacement.

Do you replace cracked glass cooktops in East Charlotte homes?

Yes, when the glass is available for that model. Stop using a cracked top and turn off its breaker until it is repaired. On an older range, a new glass top may cost a large share of a replacement, and we will help you compare.

AGA Repair

AGA Cooktop Repair in East Charlotte, NC

AGA cooktop repair in East Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

AGA Cooktops: What We Check First

The cooking surface on an AGA depends on the model. A traditional AGA has two large cast-iron hotplates, usually a hotter boiling plate and a cooler simmering plate, each covered by a heavy insulated lid when not in use. They draw heat from the same core as the ovens, so they are always warm. Conventional AGA range cookers have gas burners or induction zones that work like other modern cooktops.

Hotplate slow to recover because the core runs cool
Worn insulated lid hinges and hardened seals losing heat
Gas range cooker igniter or spark module failure
Induction zone control board or coil damaged by surges

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our AGA cooktop repair guide.

Long Simmering, Spills and Burner Switches

Cooking for a large household means long simmering, heavy pots and frequent spills, and cooktops show it. On gas surfaces, boil-overs clog burner ports and soak the igniter, causing constant clicking or uneven flames. On electric coil tops, elements and their receptacles burn out from heavy use, and the infinite switch behind each knob can fail so a burner only runs on high. Smooth glass tops can crack from heavy cookware or sliding pots. Before any check, turn off the breaker, and never work on the gas supply. If you smell gas, leave the house and call the gas utility or 911.

Cleaning First, Then Testing

Remove gas burner caps, clean the ports with a soft brush and let everything dry fully before reseating the caps evenly. On a coil top, swap a dead element into a working position to see whether the element or the switch is at fault. If the problem stays, we test igniters, switches, receptacles and elements and tell you the cost first. Most cooktop repairs are straightforward.