My Frigidaire gas oven igniter glows but the oven won't light. Why?

A glowing igniter can still be too weak to open the gas valve. As igniters age, their current draw drops below what the valve needs. Replacing the igniter usually solves the problem.

My gas oven takes a long time to heat in my East Charlotte home. Is it the igniter?

That is the most likely cause. As igniters age they draw less current, so the safety valve opens late or not at all. We measure it to confirm and replace it if needed, which is one of the more common gas oven repairs.

Our oven door won't close tightly anymore. Can that be repaired?

Usually, yes. Worn or bent hinges and a flattened door gasket are common on ovens that get daily use, and both can be replaced. A tight door matters for even baking and for keeping heat away from the control panel.

Frigidaire Repair

Frigidaire Oven / Range Repair in East Charlotte, NC

Frigidaire oven / range repair in East Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Oven / Range Repair

LG Oven / Range Repair

Whirlpool Oven / Range Repair

GE Oven / Range Repair

Maytag Oven / Range Repair

Bosch Oven / Range Repair

KitchenAid Oven / Range Repair

Frigidaire Oven / Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Frigidaire Oven / Ranges: What We Check First

Most Frigidaire ovens we work on are the oven cavity of a freestanding or slide-in range, though the brand also makes wall ovens, including Gallery and Professional models. Gas ovens use a hot-surface igniter that glows and opens the gas valve, while electric ovens use bake and broil elements. Newer models may add convection, air fry or steam clean modes, all controlled by an electronic board with a temperature sensor.

Gas bake igniter glowing but too weak to open the valve
Bake or broil element burned out or blistered
Temperature sensor drifting, causing the oven to run hot or cold
Control board or touch panel damaged by a power surge

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Frigidaire oven / range repair guide.

Heavy Cooking, Weak Igniters and Worn Elements

Kitchens in East Charlotte ranch homes and apartments often cook for many people, so ovens accumulate hours quickly. Gas ovens commonly develop a weak igniter that glows but no longer opens the valve promptly, leading to long preheats or no heat at all. Electric ovens lose their bake element to a burned spot or a split, and both types suffer from temperature sensors that drift and make baking unpredictable. Heavy use also wears oven door hinges and seals, which lets heat escape and stretches cooking times.

Before Calling and What We Do

Check the temperature with an oven thermometer on the center rack, and look at the lower element of an electric oven for visible damage with the breaker off. Never try to adjust gas components. A gas odor means everyone goes outside and someone calls the gas utility or 911. Our technician tests the igniter or element, sensor, door and controls, then tells you the diagnosis and price. Most oven repairs here use common parts and are finished in one visit when the part is on hand.