Why is there water sitting in the bottom of my Electrolux dishwasher?

Usually the filter is clogged or something is jammed in the drain pump. Check and rinse the filter first. If the water still doesn't drain, the pump, drain hose or garbage disposal connection needs to be checked.

Our second dishwasher at the island in Myers Park barely gets used and now leaks. Why?

Dishwashers that sit idle can develop dried door gaskets, sticky inlet valves or pump seals that shrink. Running it periodically helps. The technician will find which part leaks and give you the price to fix it.

My dishwasher in an Elizabeth bungalow backs up into the sink. Is it the dishwasher?

Often the cause is the sink drain or disposal rather than the dishwasher. A clogged disposal inlet, a slow drain trap or a missing high loop on the hose can push water back. We check these first.

Electrolux Repair

Electrolux Dishwasher Repair in Myers Park & Elizabeth, NC

Electrolux dishwasher repair in Myers Park & Elizabeth, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Electrolux Dishwashers: What We Check First

Electrolux dishwashers sit on a platform closely related to Frigidaire's higher-end models. They use a stainless tub, a filter assembly under the lower spray arm, a circulation pump with an attached heater on many versions, and a separate drain pump. Controls are usually hidden in the top edge of the door, and many models have features like a scrubbing zone at the back of the lower rack or adjustable spray patterns.

Drain pump impeller jammed by glass or food debris
Door latch switch failure preventing the cycle from starting
Hidden top touch controls unresponsive from moisture intrusion
Clogged filter or spray arm holes causing poor wash results

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Electrolux dishwasher repair guide.

Panel-Ready Units and Older Sink Plumbing

Myers Park kitchens frequently hide dishwashers behind cabinet panels, sometimes adding a second unit at an island. Panel-ready designs put the controls on the top edge of the door, and a stuck latch or a misaligned panel can keep the door from sealing. A second dishwasher that runs rarely may develop a sticky inlet valve or a dried-out seal.

In Elizabeth and Chantilly, the dishwasher is often installed beside a sink whose drain plumbing has been modified through several remodels. An older drain trap, a disposal with a clogged inlet or a hose without a high loop can cause backups and odors. A dishwasher fitted into an older cabinet run may also sit slightly out of level, which affects how the door seals.

Clean the tub filter, run the disposal before starting, and check for a kinked hose with the power off. If water appears on the floor, turn off the supply valve. The technician tests the pump, valve, latch and controls and explains the price before work.