Why is my Fisher & Paykel DishDrawer leaking?

A hardened lid seal or a drawer that is not closing fully are the most common causes. Overloading or dishes blocking the lid can also cause leaks. Replacing the lid seal usually solves it.

Our second dishwasher at the island in Myers Park barely gets used and now leaks. Why?

Dishwashers that sit idle can develop dried door gaskets, sticky inlet valves or pump seals that shrink. Running it periodically helps. The technician will find which part leaks and give you the price to fix it.

My dishwasher in an Elizabeth bungalow backs up into the sink. Is it the dishwasher?

Often the cause is the sink drain or disposal rather than the dishwasher. A clogged disposal inlet, a slow drain trap or a missing high loop on the hose can push water back. We check these first.

Fisher & Paykel Repair

Fisher & Paykel Dishwasher Repair in Myers Park & Elizabeth, NC

Fisher & Paykel dishwasher repair in Myers Park & Elizabeth, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Dishwashers: What We Check First

The DishDrawer is the reason many people know Fisher & Paykel. Each drawer is a complete dishwasher: a pull-out tub, an integrated motor and pump at the bottom, a filter, and a lid that lowers to seal the tub during the wash. A flexible harness and hose follow the drawer as it opens and closes, carrying power, signals and water. In a double DishDrawer, the top and bottom are independent machines that share a cabinet but not a motor or control. Fisher & Paykel also sells conventional built-in dishwashers, which follow a more familiar design.

Hardened lid seal letting water or steam escape the drawer
Lid mechanism failure preventing the tub from sealing
Integrated motor and pump fault stopping the wash
Worn flexible harness causing intermittent drawer faults

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel dishwasher repair guide.

Panel-Ready Units and Older Sink Plumbing

Myers Park kitchens frequently hide dishwashers behind cabinet panels, sometimes adding a second unit at an island. Panel-ready designs put the controls on the top edge of the door, and a stuck latch or a misaligned panel can keep the door from sealing. A second dishwasher that runs rarely may develop a sticky inlet valve or a dried-out seal.

In Elizabeth and Chantilly, the dishwasher is often installed beside a sink whose drain plumbing has been modified through several remodels. An older drain trap, a disposal with a clogged inlet or a hose without a high loop can cause backups and odors. A dishwasher fitted into an older cabinet run may also sit slightly out of level, which affects how the door seals.

Clean the tub filter, run the disposal before starting, and check for a kinked hose with the power off. If water appears on the floor, turn off the supply valve. The technician tests the pump, valve, latch and controls and explains the price before work.