My Hobart undercounter will not start when I close the door. What should I check?

First confirm the machine has power and the door is fully latched. A worn door interlock switch is a very common cause, as is a tank that has not filled enough to allow the cycle. We test both, plus the control, on site.

Our dishwasher in a new Steele Creek home has never drained right. Could it be the install?

Yes. A disposal knockout plug left in place or a kinked drain hose will stop draining from day one. Those are quick to fix once found. If the installation checks out, the pump or a check valve may be at fault.

Is an older dishwasher in a home near Lake Wylie worth repairing?

It depends on the fault and the model. Pumps, valves and door seals are usually reasonable repairs, while a rusted tub or discontinued control often is not. We give you the diagnosis and price so you can compare with replacement.

Hobart Repair

Hobart Dishwasher Repair in Steele Creek, NC

Hobart dishwasher repair in Steele Creek, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hobart Dishwashers: What We Check First

Hobart dishwashers in restaurants and bars around Charlotte are mostly undercounter units and door-type machines, with conveyor models in larger kitchens. All of them follow the same rhythm: recirculate heated wash water from a tank through spinning arms, drain or overflow some of it, then hit the rack with a fresh final rinse that sanitizes either by heat or by chemical. A high-temperature machine adds a booster heater to make the rinse water hot enough.

Scale-coated booster element leaving the final rinse below sanitizing temperature
Door interlock switch worn out, stopping cycles midway
Fill solenoid sticking, causing a short tank fill and poor wash
Wash pump seal leaking water onto the dish room floor

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hobart dishwasher repair guide.

Installation Details in New Construction

In new construction, a dishwasher that will not drain is sometimes not broken at all. If a garbage disposal was installed or replaced and the knockout plug inside its dishwasher inlet was never removed, the water has nowhere to go. A drain hose kinked behind the unit during installation causes the same symptom, and plenty of Steele Creek homes still have their original installation.

Beyond installation, entry-level builder dishwashers commonly develop noisy pumps, latches that stop catching, and filters packed with food because nobody knew the filter was removable. Homes near Lake Wylie that date from earlier decades may have older units with worn spray arms and leaking door seals.

Turn off the breaker before checking under the dishwasher. Clean the filter and confirm the drain hose rises in a high loop under the sink. Our technician tests the pump, inlet valve and float switch, explains the cause, and gives the price before any repair.