My Hoshizaki cubelet machine is making a grinding noise. Should I keep running it?

Grinding often means bearing wear or heavy scale inside the freezing cylinder. Running it that way can damage the auger, the cylinder and the gear motor. Shut it off and schedule a check soon.

The ice maker in my West Charlotte rental fridge stopped after the unit was moved. Why?

Moving the refrigerator often kinks or pinches the thin supply line behind it, or the valve was turned off and never reopened. Check both with the fridge unplugged. If the water supply is fine, the inlet valve or ice maker may need testing on a visit booked by the owner.

My side-by-side dispenser hums but no ice comes out. What causes that?

Usually ice has melted and refrozen into a solid block that jams the auger, often after the door was left ajar or the power flickered. Empty the bucket and let it thaw. If it jams again soon, a door seal, fan or temperature issue is likely the cause.

Hoshizaki Repair

Hoshizaki Ice Maker Repair in West Charlotte, NC

Hoshizaki ice maker repair in West Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Sub-Zero Ice Maker Repair

Atosa Ice Maker Repair

Hoshizaki Ice Maker Repair

Traulsen Ice Maker Repair

Manitowoc Ice Maker Repair

MaxxIce Ice Maker Repair

Perlick Ice Maker Repair

Scotsman Ice Maker Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hoshizaki Ice Makers: What We Check First

A Hoshizaki crescent-cube machine works differently from most competitors. Instead of a flat grid of cells, ice forms on vertical stainless evaporator plates as water cascades over them. When the evaporator thermistor reaches the harvest point, hot gas warms the plates and fresh water flows behind them to release the crescents into the bin. A float switch controls refilling. Cubelet and flake models use an auger turning inside a refrigerated cylinder instead.

Mineral-coated float switch sticking and mis-filling the water reservoir
Evaporator thermistor drift upsetting freeze and harvest timing
Scale inside cubelet freezing cylinder wearing auger bearings and seals
Weak water pump leaving dry patches on stainless evaporator plates

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hoshizaki ice maker repair guide.

Water Lines, Add-On Kits and Freezer Temperature

Many older top-freezer refrigerators in west-side homes had an ice maker kit added later, fed by a thin copper or plastic line through the back of the cabinet. That line can kink when the fridge is pushed back after cleaning, and old saddle valves on the supply pipe sometimes clog or start to drip. A freezer running too warm also stops ice production well before food starts to thaw. Side-by-side models in rentals and duplexes add a dispenser, where a frozen fill tube or a jammed auger often ends ice delivery.

Checks You Can Make Before We Arrive

Make sure the supply valve is open and the ice maker's arm or switch is in the on position, and replace the water filter if it is overdue. Unplug the fridge before breaking up fused cubes in the bucket. If ice still does not form, our technician tests the inlet valve, the ice maker module and the freezer temperature, then explains the cost before any repair. Tenants should contact their landlord first.