Why is my Fisher & Paykel DishDrawer leaking?

A hardened lid seal or a drawer that is not closing fully are the most common causes. Overloading or dishes blocking the lid can also cause leaks. Replacing the lid seal usually solves it.

My Oakboro dishwasher leaves a gritty film. Is it the dishwasher or the water?

Often both. Well sediment clogs the inlet screen and reduces fill, which weakens cleaning. We clean or replace the valve, and a sediment filter on the well helps keep it from happening again.

Do you repair dishwashers in new Locust homes that drain slowly?

Yes. Slow drains are often a clogged filter, a disposer knockout plug left in place or a kinked hose. We check those and the drain pump and quote the repair.

Fisher & Paykel Repair

Fisher & Paykel Dishwasher Repair in Locust, Stanfield & Oakboro, NC

Fisher & Paykel dishwasher repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Dishwashers: What We Check First

The DishDrawer is the reason many people know Fisher & Paykel. Each drawer is a complete dishwasher: a pull-out tub, an integrated motor and pump at the bottom, a filter, and a lid that lowers to seal the tub during the wash. A flexible harness and hose follow the drawer as it opens and closes, carrying power, signals and water. In a double DishDrawer, the top and bottom are independent machines that share a cabinet but not a motor or control. Fisher & Paykel also sells conventional built-in dishwashers, which follow a more familiar design.

Hardened lid seal letting water or steam escape the drawer
Lid mechanism failure preventing the tub from sealing
Integrated motor and pump fault stopping the wash
Worn flexible harness causing intermittent drawer faults

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel dishwasher repair guide.

Film, stains and slow fills

On a private well around Stanfield or Oakboro, a dishwasher's small inlet valve screen can clog with sediment until the machine underfills, leaving gritty film on dishes. Iron shows up as orange or brown stains on racks and the tub. Over time, grit can wear the valve and the pump seal, leading to slow leaks at the base.

Newer dishwashers in Locust are more likely to show drain clogs from the filter or disposer, door latch faults or control errors after a summer storm. In any home, clean the tub filter, check the spray arms and reset the breaker if the controls freeze. Turn off water and power if you see a leak.

The technician tests the inlet valve, pump, heater, float and controls and quotes before starting. If sediment is the root cause, we suggest a filter for the well, a job for a water treatment company, so the new valve is not clogged within months.