How do I clean the ice thickness probe on my Manitowoc?

Follow the cleaning procedure in the manual, which covers removing and cleaning the probe with an approved solution. Turn the machine off first and handle the probe gently, since bending it changes the cube thickness. If cubes are still wrong afterward, the probe gap or the control may need checking.

Why does my ice maker in Stanfield stop every few months?

On well water, sediment often clogs the inlet valve or filter repeatedly. Replacing the valve fixes it for a while, and a sediment filter on the well protects the new one. We can diagnose it and quote the repair.

Can you fix the ice maker in my new Locust refrigerator?

Yes. We check whether it is still under the manufacturer's warranty first, since that may be the better route. If not, we test the module, valve and fill tube and quote the repair.

Manitowoc Repair

Manitowoc Ice Maker Repair in Locust, Stanfield & Oakboro, NC

Manitowoc ice maker repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Sub-Zero Ice Maker Repair

Atosa Ice Maker Repair

Hoshizaki Ice Maker Repair

Traulsen Ice Maker Repair

Manitowoc Ice Maker Repair

MaxxIce Ice Maker Repair

Perlick Ice Maker Repair

Scotsman Ice Maker Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Manitowoc Ice Makers: What We Check First

A Manitowoc cube machine runs a cycle that depends on two small probes. The ice thickness probe sits near the evaporator face and signals the control when the ice slab has grown thick enough for water to bridge to it. The water level probe sits in the trough and tells the inlet valve when to stop filling. Between them, they decide how full the evaporator gets and when harvest starts. The water pump and distribution tube keep water flowing evenly over the nickel-plated evaporator.

Scaled ice thickness probe triggering harvest early, making thin cubes
Fouled water level probe causing short or overflowing trough fills
Clogged distribution tube leaving dry streaks on the evaporator
Recirculating condenser air lengthening freeze cycles in tight installations

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Manitowoc ice maker repair guide.

Sediment, filters and long water lines

Well sediment and iron collect in the refrigerator's inlet valve and filter, which shrinks cubes or stops ice production entirely. In farmhouses, the water line to the refrigerator may run a long way from the supply, sometimes through an unheated crawl space where it can freeze during an ice storm. In newer Locust homes, overdue filters and failing ice maker modules are more typical.

Replace the refrigerator filter if it is past due, check that the shutoff valve is fully open, and look behind the refrigerator for a kinked line. Confirm the freezer is cold enough, since a warm freezer makes little ice. If a well filter is installed, check whether it needs changing.

The technician tests the inlet valve, ice maker, fill tube and freezer temperature, and quotes before work. Visits may be grouped on route days at this edge of our area, so the model number at booking helps us bring a valve that fits.