My Kenmore washer fills but won't spin. What is wrong?

On Whirlpool-built top-loaders, a failed lid switch or worn drive coupler is a common cause. On front-loaders, a door lock or drain pump issue may stop the spin. Knowing the model prefix helps narrow it down.

Our washer near Marshville fills slower every month. Is it the well?

It often is. Sediment from a well collects in the inlet screens and the water valve, gradually choking the flow. A whole-house sediment filter helps. If cleaning the screens does not restore normal filling, the inlet valve may need replacing.

The washer in our Wingate rental keeps stopping with an unbalanced load. Is it broken?

Sometimes it is just how the machine is being loaded, such as a single heavy blanket or an overstuffed tub. Repeated stops with normal loads usually point to worn suspension parts or a sensor fault. We can tell the difference and explain it to the owner and tenant.

Kenmore Repair

Kenmore Washer Repair in Monroe, Wingate & Marshville, NC

Kenmore washer repair in Monroe, Wingate & Marshville, Union County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Washers: What We Check First

Kenmore washers came from Whirlpool, LG and Frigidaire. The model prefix 110 usually means a Whirlpool-built top-load or front-load washer, 796 points to LG, and 417 to Frigidaire front-loaders. Top-load Kenmore washers from Whirlpool are especially common in older homes, and many are still running. Front-load Kenmore Elite washers were often LG-built. Laundry pairs from Sears were often sold as matched sets, so the dryer beside the washer may share the same maker and the same model prefix.

Lid switch failure on Whirlpool-built top-loaders stopping spin
Drive coupler worn on older direct-drive Kenmore top-loaders
Drain pump clogged on LG-built front-load Kenmore Elite washers
Front-load door boot mildew and bearing noise as machines age

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore washer repair guide.

Three Settings, Three Kinds of Washer Trouble

Out toward Marshville, private wells deliver sediment and iron along with the water. The fine screens where the hoses connect to the washer trap that grit, so fills get slower, and some machines eventually show a fill error. Iron can also leave orange staining on light clothes. Turning off both valves, unplugging the washer and checking those screens is a reasonable first step.

Shared rentals around Wingate push washers hard. Overloaded tubs wear suspension parts and drum bearings, and coins or hair ties end up in the drain pump. In older Monroe homes, the laundry may sit in a converted porch or utility room with old shutoff valves and drain standpipes that do not keep up with a modern washer's pump.

Our technician runs the washer through fill, agitation or tumble, drain and spin, and tests the valve, pump, lid or door lock and suspension. You hear the cause and the price before work begins, and we say so if the trouble is in the plumbing rather than the machine.