Why won't my Amana dishwasher start?

A worn door latch or switch is a common cause, since the dishwasher will not run unless the latch confirms the door is closed. A control fault can also prevent startup. A technician can test both.

Why are my dishes gritty on well water in Clover?

Sediment in the water is the likely cause. It can clog the filter, the spray arms and the inlet screen. Clean those first, and if the grit continues, consider a sediment filter for the house.

Our Lake Wylie dishwasher won't drain after we were gone a month. What happened?

Food residue may have dried in the filter or drain, or the drain pump may be sticking after sitting. Clean the filter and run the disposal if the dishwasher drains through it. If it still won't drain, we test the pump.

Amana Repair

Amana Dishwasher Repair in Clover & Lake Wylie, SC

Amana dishwasher repair in Clover & Lake Wylie, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Amana Dishwashers: What We Check First

Amana dishwashers are basic, Whirlpool-built machines, usually with plastic tubs, simple button controls and either a manual filter or, on older models, a hard-food disposer. They use a wash motor and pump, a drain pump, an inlet valve, a heating element and a door latch with switches. Builder-grade and rental kitchens across the area are full of them.

Drain pump clogged or failed, leaving standing water
Inlet valve clogged by well-water sediment, preventing fill
Door latch or switch failure keeping the cycle from starting
Hard-food disposer jammed by glass or fruit pits

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Amana dishwasher repair guide.

Sediment, iron and rural water

Dishwashers on private wells around Clover face sediment and iron that clog the inlet valve screen, coat the spray arms and leave a gritty film on dishes. A slow fill, weak spray or rust-colored residue in the tub are typical signs. Cleaning the spray arms and the filter at the bottom of the tub helps, and a whole-house sediment filter kept on schedule protects the valve.

If a dishwasher on well water stops filling entirely, the inlet valve may be clogged beyond cleaning or stuck shut. Turn off the dishwasher's breaker and the supply valve under the sink before pulling the kick plate to look for drips. Replacing the valve is a common, moderate repair, and the technician will also flush the line so the new screen does not clog on the first cycle.

Idle machines in lake homes

A dishwasher that sits unused for weeks can develop dried seals, a stuck float or a pump that hesitates at startup. Before leaving a Lake Wylie home for a while, run a quick rinse cycle and leave the door slightly open. If it will not start, drain or fill when you return, we test the pump, valve, float and controls, and we give you the price before any work.