Why does one burner on my Hotpoint cooktop only work when I wiggle it?

That is a classic sign of a burned receptacle or corroded element terminals. The poor connection heats up and gets worse over time. Replace both the receptacle and the element together to prevent a repeat.

Our Clover cooktop runs on propane and the flames are yellow. Is that a problem?

Yes, it should be checked. Yellow, sooty flames on propane often mean the orifices are not set for that fuel or the burner ports are partly blocked. Stop using the affected burners and book a visit.

Do you repair outdoor kitchen burners at Lake Wylie homes?

Yes, for residential built-in units. We check igniters, valves and burner tubes, which often collect debris or insects. We do not work on the gas supply line itself.

Hotpoint Repair

Hotpoint Cooktop Repair in Clover & Lake Wylie, SC

Hotpoint cooktop repair in Clover & Lake Wylie, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hotpoint Cooktops: What We Check First

Hotpoint's built-in cooktops are mostly electric, using either plug-in coil elements or radiant elements under a glass-ceramic surface. Each burner is controlled by an infinite switch that cycles power on and off to hold a heat level, and coil models use receptacles that the element plugs into. The hardware is simple, which means problems are usually isolated to one burner and are straightforward to track down.

Burned coil receptacle causing intermittent burner heat
Infinite switch contacts welded so a burner stays on high
Broken radiant element under the glass-ceramic surface
Corroded element terminals arcing at the plug-in connection

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hotpoint cooktop repair guide.

Propane, natural gas and electric tops around Clover

Some rural properties around Clover have no natural gas line, so gas cooktops there run on propane. A propane cooktop needs the correct orifices for that fuel, and if it was converted, a yellow or sooty flame may mean the conversion was incomplete. If you ever smell gas, leave the house and call the gas supplier or 911 from outside.

Electric coil and glass radiant cooktops in older Clover homes usually fail at the element, the receptacle or the infinite switch. Those are common parts, so a single burner that stays cold is rarely a reason to replace the whole top. Check the breaker after any storm, and stop using a glass surface that has cracked.

Lake Wylie kitchens and outdoor cooking

Newer Lake Wylie kitchens often have induction or gas cooktops set into islands, and some homes add outdoor kitchens with built-in burners. Outdoor units face humidity, pollen and spider webs in their burner tubes, which cause weak or uneven flames. We repair the cooktop or burner unit itself, test the igniters and switches and give you the price before any work.