Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

Our Clover cooktop runs on propane and the flames are yellow. Is that a problem?

Yes, it should be checked. Yellow, sooty flames on propane often mean the orifices are not set for that fuel or the burner ports are partly blocked. Stop using the affected burners and book a visit.

Do you repair outdoor kitchen burners at Lake Wylie homes?

Yes, for residential built-in units. We check igniters, valves and burner tubes, which often collect debris or insects. We do not work on the gas supply line itself.

Roper Repair

Roper Cooktop Repair in Clover & Lake Wylie, SC

Roper cooktop repair in Clover & Lake Wylie, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Propane, natural gas and electric tops around Clover

Some rural properties around Clover have no natural gas line, so gas cooktops there run on propane. A propane cooktop needs the correct orifices for that fuel, and if it was converted, a yellow or sooty flame may mean the conversion was incomplete. If you ever smell gas, leave the house and call the gas supplier or 911 from outside.

Electric coil and glass radiant cooktops in older Clover homes usually fail at the element, the receptacle or the infinite switch. Those are common parts, so a single burner that stays cold is rarely a reason to replace the whole top. Check the breaker after any storm, and stop using a glass surface that has cracked.

Lake Wylie kitchens and outdoor cooking

Newer Lake Wylie kitchens often have induction or gas cooktops set into islands, and some homes add outdoor kitchens with built-in burners. Outdoor units face humidity, pollen and spider webs in their burner tubes, which cause weak or uneven flames. We repair the cooktop or burner unit itself, test the igniters and switches and give you the price before any work.