My Roper burner clicks but never lights. What should I check?

With the stove off and cool, make sure the burner cap is seated correctly and the ports are clear. Look at the igniter tip for cracks or crusted food. If everything looks clean and it still will not light, the igniter or wiring may need replacing.

The receptacle under one coil burner on my Rock Hill stove is scorched. Can I still use it?

No, stop using that burner. A scorched receptacle can overheat further and damage the wiring. We can replace the receptacle and element and check the switch, and we quote the repair first.

Can you repair a rental stove near Winthrop if the landlord approves by phone?

Yes. We diagnose the stove with the tenant there, then send the owner the cause and price. Once approved, we finish the repair.

Roper Repair

Roper Stove Repair in Rock Hill, SC

Roper stove repair in Rock Hill, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Stoves: What We Check First

A Roper gas stove pairs four sealed or open burners on top with a gas oven below, all built on basic Whirlpool hardware. Ignition is electric on most models still in use: turning any burner knob closes a spark switch, which signals a spark module to fire every igniter at once. Some very old Ropers may still use standing pilots, which behave differently and need their own approach. Simple as the system is, small things like spills or a misplaced cap can stop it from working.

Clogged burner ports or crusted igniter stopping ignition
Wet spark switch behind the knob causing constant clicking
Yellow or lifting flames from dirty or misaligned burner parts
Failed spark module leaving every burner silent

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper stove repair guide.

Burners that won't light or heat

On older gas stoves, a burner that will not light is often a clogged port, a worn igniter or a spark switch that has failed, and on some very old models a standing pilot that has gone out. On electric coil stoves, the common faults are a burned-out element, a scorched receptacle or a worn infinite switch. These are ordinary parts, which is why repairing an older stove often makes sense.

Before calling, turn the stove off and let it cool. Clean and dry gas burner caps and ports; for coil elements, unplug and reseat each element firmly. If a receptacle looks scorched or melted, stop using that burner until it has been replaced, because the damage spreads to the wiring.

Rentals, safety and what the visit covers

Stoves in Rock Hill rentals get hard use and frequent spills, which wear switches and receptacles faster. We can meet a tenant, send the owner the diagnosis and price, and repair once approved. If you smell gas, leave the house and call the gas utility or 911. We test igniters, valves, switches and wiring, but we do not work on gas supply lines.