My Roper dryer will not start at all. Could it be a fuse?

Yes. On many Roper and Whirlpool dryers, the thermal fuse is wired into the motor circuit, so a blown fuse stops the dryer completely. A failed door switch, start switch or broken belt switch can do the same. We test each in sequence to find the cause.

Our Polkton dryer gets hot but clothes stay damp. What is going on?

When the drum is hot and clothes stay wet, moist air usually is not leaving fast enough. A packed duct or a blocked outside hood, including a nest, is the usual reason. Check the hood first; if it is clear, we can test airflow and the moisture sensor.

Do you repair propane dryers in Peachland?

Yes. Propane dryers use the same main parts as natural gas models, such as the igniter, gas valve coils and flame sensor. Work on the propane tank, regulator or supply line is handled by your propane provider.

Roper Repair

Roper Dryer Repair in Peachland & Polkton, NC

Roper dryer repair in Peachland & Polkton, Anson County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dryer Repair

LG Dryer Repair

Whirlpool Dryer Repair

GE Dryer Repair

Maytag Dryer Repair

Bosch Dryer Repair

Frigidaire Dryer Repair

Kenmore Dryer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Dryers: What We Check First

Roper dryers are built on Whirlpool's long-running 29-inch platform, one of the most widely serviced dryer designs in the country. A single motor turns the drum by a belt and spins the blower wheel directly. Electric models use a coil heating element with a high-limit thermostat and a thermal cutoff on the heater housing, plus a thermal fuse on the blower housing. Gas models use an igniter, flame sensor and gas valve coils.

Thermal fuse on the blower housing blown by vent restriction
Heater thermal cutoff and high-limit thermostat failure stopping heat
Snapped drive belt leaving the drum stationary while motor runs
Dry idler pulley squealing or drum rollers thumping during tumble

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper dryer repair guide.

Dust, Nests and Long Drying Times

In rural homes, dryers often sit in a utility room, back porch or garage, close to outside air that carries field dust and pollen. Work clothes shed more lint and dirt than ordinary laundry, and outside vent hoods on country houses sometimes attract birds, wasps or mud daubers. Any of these can choke airflow, which shows up as long drying times, a hot cabinet or a dryer that shuts off midway.

Clean the lint screen after every load and check that the outside flap opens when the dryer runs. Once a year, with the dryer unplugged and gas turned off, disconnect and clean the duct. Many homes here run gas dryers on propane; do not touch the supply line, and if you smell gas, leave and call your propane supplier or 911.

Tell us whether the dryer is gas, propane or electric when you book. Our technician tests the heating parts, fuses, thermostats, belt and rollers, explains what failed and quotes the repair, including any part that has to be ordered. Repairs are backed by a 90-day parts and 30-day labor warranty.