My Roper dryer will not start at all. Could it be a fuse?

Yes. On many Roper and Whirlpool dryers, the thermal fuse is wired into the motor circuit, so a blown fuse stops the dryer completely. A failed door switch, start switch or broken belt switch can do the same. We test each in sequence to find the cause.

Do you repair propane dryers in Mount Pleasant?

Yes. Propane dryers use the same basic igniter and gas valve system as natural gas models, set up for propane. We test the ignition parts and confirm the dryer is configured for the fuel it runs on.

My dryer in a Midland manufactured home overheats. Is it the vent?

Often. Short, tight vent runs in manufactured homes clog quickly, and a restricted vent makes the dryer cycle on its safety thermostats. We check airflow along with the dryer's heating parts and quote the repair first.

Roper Repair

Roper Dryer Repair in Midland & Mount Pleasant, NC

Roper dryer repair in Midland & Mount Pleasant, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dryer Repair

LG Dryer Repair

Whirlpool Dryer Repair

GE Dryer Repair

Maytag Dryer Repair

Bosch Dryer Repair

Frigidaire Dryer Repair

Kenmore Dryer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Dryers: What We Check First

Roper dryers are built on Whirlpool's long-running 29-inch platform, one of the most widely serviced dryer designs in the country. A single motor turns the drum by a belt and spins the blower wheel directly. Electric models use a coil heating element with a high-limit thermostat and a thermal cutoff on the heater housing, plus a thermal fuse on the blower housing. Gas models use an igniter, flame sensor and gas valve coils.

Thermal fuse on the blower housing blown by vent restriction
Heater thermal cutoff and high-limit thermostat failure stopping heat
Snapped drive belt leaving the drum stationary while motor runs
Dry idler pulley squealing or drum rollers thumping during tumble

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper dryer repair guide.

Utility rooms, manufactured homes and dust

Dryers in manufactured homes often sit in a small closet and vent through the floor or a short side-wall run, and lint can build up quickly where the duct turns. Farmhouses and newer homes on large lots around Midland usually have a laundry room off the garage or mudroom, where field dust and spring pollen add to the load on the vent and the outside flap.

With the dryer running, check for strong airflow at the outside vent, and clean the lint screen and the area under it. Some homes here run dryers on propane rather than natural gas. If you smell gas of either kind, shut off the dryer, leave the house and call your gas supplier or 911.

We test the heating system, thermal fuse, thermostats, belt, rollers and motor, and explain the diagnosis and price. Mount Pleasant visits may be scheduled in route blocks on set days, so having the model number ready helps us arrive with the likely part.