Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

My propane cooktop in Midland has yellow flames. Is that a problem?

It can be. Yellow, floppy flames often mean dirty burners or an orifice that does not match propane. Stop using that burner and have it checked, since poor combustion is not something to ignore.

Do you repair glass-top cooktops in Mount Pleasant?

Yes. We test the element, switch and limiter, and check whether a replacement glass top is available if it is cracked. The price comes before the repair.

Roper Repair

Roper Cooktop Repair in Midland & Mount Pleasant, NC

Roper cooktop repair in Midland & Mount Pleasant, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Propane burners and glass tops

On a propane cooktop, burners that light weakly, flame unevenly or keep clicking usually come down to a dirty or wet igniter, a misplaced burner cap, or clogged burner ports. If the cooktop was converted from natural gas, the orifices must match propane, and a mismatch shows up as yellow, lazy flames. Glass-top electric cooktops more often lose an element or a switch, and controls can be affected by storm surges.

Clean and dry the burner caps and igniters, make sure the propane tank has fuel, and check the breaker for electric models. If you smell gas, turn everything off, leave and call your propane supplier or 911. The technician tests ignition parts, burners, elements and switches, and quotes before repairing. Visits toward Mount Pleasant may be grouped on route days.