My Hobart undercounter will not start when I close the door. What should I check?

First confirm the machine has power and the door is fully latched. A worn door interlock switch is a very common cause, as is a tank that has not filled enough to allow the cycle. We test both, plus the control, on site.

There's orange residue in my Lancaster dishwasher. Is it broken?

Probably not. Iron in well water often leaves that residue. Cleaning the tub and spray arms helps, and an iron filter for the house may be the long-term fix.

My Lancaster dishwasher won't fill. Could it be the well?

Yes. Sediment can clog the inlet valve screen. If cleaning it does not help, the valve may need replacing, which is a common repair.

Hobart Repair

Hobart Dishwasher Repair in Lancaster, SC

Hobart dishwasher repair in Lancaster, Lancaster County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Hobart Dishwashers: What We Check First

Hobart dishwashers in restaurants and bars around Charlotte are mostly undercounter units and door-type machines, with conveyor models in larger kitchens. All of them follow the same rhythm: recirculate heated wash water from a tank through spinning arms, drain or overflow some of it, then hit the rack with a fresh final rinse that sanitizes either by heat or by chemical. A high-temperature machine adds a booster heater to make the rinse water hot enough.

Scale-coated booster element leaving the final rinse below sanitizing temperature
Door interlock switch worn out, stopping cycles midway
Fill solenoid sticking, causing a short tank fill and poor wash
Wash pump seal leaking water onto the dish room floor

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Hobart dishwasher repair guide.

Iron, sediment and spray arms

On private wells around Lancaster, sediment and iron clog the dishwasher's inlet valve screen and build up inside the spray arms. A slow fill, weak spray, gritty dishes or orange-brown residue in the tub are typical signs. Remove the spray arms and rinse their holes, clean the filter at the bottom of the tub and keep any whole-house sediment filter on its change schedule.

In older in-town homes, the dishwasher may have been added to a kitchen that was never designed for one. Long drain runs to the sink, aging supply lines and installs that are not quite level lead to door leaks, slow draining and water left standing in the tub. Before booking, check that the drain hose has a high loop under the sink and that the unit sits level.

The repair visit

Lancaster appointments may be grouped into route days. If the dishwasher is leaking, turn off its breaker and the supply valve under the sink. The technician tests the inlet valve, the drain pump, the heater, the float and the controls, then explains the cause and quotes the repair before starting.