Why does my Fisher & Paykel top-loader keep stopping during spin?

A worn lid lock is the most common cause, since the washer will not spin unless it confirms the lid is locked. A failing motor position sensor can also cause stops and restarts. We test both before recommending a part.

Our upstairs washer shakes the floor during spin. Is that a repair or a leveling problem?

It can be either. Start by checking that all four feet sit firmly and the load is not one heavy item like a comforter. If it still shakes with a normal mixed load, worn shocks, springs or suspension rods are likely, and a technician can confirm which.

Will you find where our second-floor washer is leaking from?

Yes. We trace the leak to the hose, pump, door seal, tub or drain connection and tell you which it is. If the water is coming from the drain standpipe or house plumbing rather than the washer, we will say so, since that is a job for a plumber.

Fisher & Paykel Repair

Fisher & Paykel Washer Repair in Ballantyne & South Charlotte, NC

Fisher & Paykel washer repair in Ballantyne & South Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Washers: What We Check First

Fisher & Paykel has long built its washers around direct-drive motors, beginning with the SmartDrive top-loaders that made the brand's name in laundry. Instead of a belt and gearbox, a ring of magnets on a rotor sits around a wound stator, bolted straight to the shaft that turns the wash plate and basket. The control reads a rotor position sensor to know exactly where the motor is and how fast it is turning. Top-load models lock the lid for spin, and front-load models lock the door and seal the drum with a rubber gasket.

Worn top-load lid lock stopping spin or causing restarts
Rotor position sensor failure making the motor jerk or stall
Clogged drain pump or hose leaving water in the tub
Excess suds slowing direct-drive spin on HE models

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel washer repair guide.

Second-Floor Laundry Rooms Raise the Stakes

In many two-story homes across Ballantyne and the neighborhoods off Providence Road, the laundry room is upstairs beside the bedrooms. That is convenient until a hose weeps or a pump seal fails, because water on a second floor finds its way into the ceiling below. A drip pan under the machine with a working drain line helps, but only if it stays clear.

The usual faults are what you would expect from machines handling family-size loads: worn drain pumps, failed door locks on front-loaders, suspension wear that lets the washer walk, and mildew in the door boot during humid months. Vibration is more noticeable on an upper floor, so an off-balance spin can rattle a whole hallway.

If you spot water, shut both supply valves behind the washer and unplug it before looking further. Our technician checks the hoses, pump, inlet valve and tub seal, explains what failed and gives a price before starting. Swapping plain rubber fill hoses for braided ones is a small upgrade worth asking about while we are there.