Why does my Amana washer lid lock keep blinking?

A blinking lid lock light usually means the washer cannot confirm the lid is locked. Something may be blocking the latch, or the lock assembly may have failed. Check for obstructions first, then have the lock tested.

Our upstairs washer shakes the floor during spin. Is that a repair or a leveling problem?

It can be either. Start by checking that all four feet sit firmly and the load is not one heavy item like a comforter. If it still shakes with a normal mixed load, worn shocks, springs or suspension rods are likely, and a technician can confirm which.

Will you find where our second-floor washer is leaking from?

Yes. We trace the leak to the hose, pump, door seal, tub or drain connection and tell you which it is. If the water is coming from the drain standpipe or house plumbing rather than the washer, we will say so, since that is a job for a plumber.

Amana Repair

Amana Washer Repair in Ballantyne & South Charlotte, NC

Amana washer repair in Ballantyne & South Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Amana Washers: What We Check First

Most Amana washers are top-loaders with either a traditional agitator or a low-profile impeller, built on Whirlpool's top-load platforms. Older models used Whirlpool's classic direct-drive design with a motor coupler, while newer ones use a belt-driven gearcase with an electronic shifter and a lid lock that holds the lid closed during spin. Controls are usually simple dials and buttons.

Lid lock failure preventing spin or stopping mid-cycle
Electronic shifter fault blocking the change from agitate to spin
Drain pump clogged with socks, coins or lint
Worn motor coupler on older direct-drive top-loaders

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Amana washer repair guide.

Second-Floor Laundry Rooms Raise the Stakes

In many two-story homes across Ballantyne and the neighborhoods off Providence Road, the laundry room is upstairs beside the bedrooms. That is convenient until a hose weeps or a pump seal fails, because water on a second floor finds its way into the ceiling below. A drip pan under the machine with a working drain line helps, but only if it stays clear.

The usual faults are what you would expect from machines handling family-size loads: worn drain pumps, failed door locks on front-loaders, suspension wear that lets the washer walk, and mildew in the door boot during humid months. Vibration is more noticeable on an upper floor, so an off-balance spin can rattle a whole hallway.

If you spot water, shut both supply valves behind the washer and unplug it before looking further. Our technician checks the hoses, pump, inlet valve and tub seal, explains what failed and gives a price before starting. Swapping plain rubber fill hoses for braided ones is a small upgrade worth asking about while we are there.