All my Dacor burners click when I turn one knob. Is that normal?

Yes, on many gas cooktops every igniter sparks together when any burner is lit, then stops once the flame is established. Constant clicking after the flame catches is not normal. That usually means moisture in a switch or a failing switch or module.

My island gas cooktop keeps clicking after I clean it. Can you fix that in Huntersville?

Usually. Moisture left in a burner base or a misplaced cap is the common cause, so let it dry fully first. If clicking continues, the technician can test the spark switch and module, which are common, repairable parts.

Is a cracked glass cooktop in our townhome repairable?

The glass top is often available as a part, so replacing it may be possible without buying a new cooktop. Stop using the unit and turn off the breaker until it is inspected. We will price the glass and labor so you can compare with a new unit.

Dacor Repair

Dacor Cooktop Repair in Huntersville, NC

Dacor cooktop repair in Huntersville, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Dacor Cooktops: What We Check First

Dacor builds cooktops in two very different technologies. The gas models use sealed burners with electronic spark ignition, often with lit control knobs, and they range from 30-inch units to wide professional-style rangetops. The induction models use copper coils under a glass surface, driven by power electronics that create a magnetic field to heat the pan directly. A clicking gas burner and a dead induction zone have almost nothing in common, so the first step is knowing which you own.

Moisture in a spark switch causing nonstop burner clicking
Cracked ceramic igniter leaving one gas burner unlit
Induction cooling fan blocked, triggering overheat shutdowns
Induction power board failure following a storm surge

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Dacor cooktop repair guide.

Island Cooktops, Glass Tops and Induction

Open-plan subdivision kitchens often place a gas cooktop in the island. Spills and boil-overs soak the spark igniters and burner caps, which leads to constant clicking, burners that will not light, or a flame that lifts unevenly. Usually a careful cleaning or a new igniter or spark module solves it.

Radiant glass tops in townhomes and apartments fail differently: an element that stays dark, one that only runs on high because of a bad infinite switch, or a crack across the surface. Induction units in larger homes rely on electronics and cooling fans, and they are sensitive to surges after storms.

Safe Checks Before We Arrive

For gas, make sure burner caps sit flat and ports are dry, and never adjust the gas supply. If you smell gas, get everyone outside and call the gas utility or 911. For electric and induction units, turn off the breaker before cleaning, and stop using any cracked glass top. During the visit we test igniters, switches, elements and boards and quote the repair before starting.