Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

My island gas cooktop keeps clicking after I clean it. Can you fix that in Huntersville?

Usually. Moisture left in a burner base or a misplaced cap is the common cause, so let it dry fully first. If clicking continues, the technician can test the spark switch and module, which are common, repairable parts.

Is a cracked glass cooktop in our townhome repairable?

The glass top is often available as a part, so replacing it may be possible without buying a new cooktop. Stop using the unit and turn off the breaker until it is inspected. We will price the glass and labor so you can compare with a new unit.

Roper Repair

Roper Cooktop Repair in Huntersville, NC

Roper cooktop repair in Huntersville, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Island Cooktops, Glass Tops and Induction

Open-plan subdivision kitchens often place a gas cooktop in the island. Spills and boil-overs soak the spark igniters and burner caps, which leads to constant clicking, burners that will not light, or a flame that lifts unevenly. Usually a careful cleaning or a new igniter or spark module solves it.

Radiant glass tops in townhomes and apartments fail differently: an element that stays dark, one that only runs on high because of a bad infinite switch, or a crack across the surface. Induction units in larger homes rely on electronics and cooling fans, and they are sensitive to surges after storms.

Safe Checks Before We Arrive

For gas, make sure burner caps sit flat and ports are dry, and never adjust the gas supply. If you smell gas, get everyone outside and call the gas utility or 911. For electric and induction units, turn off the breaker before cleaning, and stop using any cracked glass top. During the visit we test igniters, switches, elements and boards and quote the repair before starting.