Why does only the inner ring of my Fisher & Paykel burner light?

Dual-flow burners have separate inner and outer rings, and the outer ports can clog with spills. Remove the rings, clean them and let them dry fully before reseating. If the outer ring still will not light, the valve or burner base may need service.

My island gas cooktop keeps clicking after I clean it. Can you fix that in Huntersville?

Usually. Moisture left in a burner base or a misplaced cap is the common cause, so let it dry fully first. If clicking continues, the technician can test the spark switch and module, which are common, repairable parts.

Is a cracked glass cooktop in our townhome repairable?

The glass top is often available as a part, so replacing it may be possible without buying a new cooktop. Stop using the unit and turn off the breaker until it is inspected. We will price the glass and labor so you can compare with a new unit.

Fisher & Paykel Repair

Fisher & Paykel Cooktop Repair in Huntersville, NC

Fisher & Paykel cooktop repair in Huntersville, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Cooktops: What We Check First

Fisher & Paykel cooktops split into two very different machines. Gas models use sealed burners, many of them dual-flow designs with separate inner and outer flame rings so one burner can simmer gently or run at full output. Induction models use copper coils under the glass to heat magnetic cookware directly, managed by power boards, a touch or dial interface and a fan that keeps the electronics cool. Both are often installed in islands or over drawers in design-focused kitchens, which affects airflow and access.

Clogged outer ring ports on dual-flow gas burners
Induction cooling fan failure cutting zones off mid-cook
Power board or coil failure leaving induction zones dead
Blocked air gap beneath an island or drawer installation

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel cooktop repair guide.

Island Cooktops, Glass Tops and Induction

Open-plan subdivision kitchens often place a gas cooktop in the island. Spills and boil-overs soak the spark igniters and burner caps, which leads to constant clicking, burners that will not light, or a flame that lifts unevenly. Usually a careful cleaning or a new igniter or spark module solves it.

Radiant glass tops in townhomes and apartments fail differently: an element that stays dark, one that only runs on high because of a bad infinite switch, or a crack across the surface. Induction units in larger homes rely on electronics and cooling fans, and they are sensitive to surges after storms.

Safe Checks Before We Arrive

For gas, make sure burner caps sit flat and ports are dry, and never adjust the gas supply. If you smell gas, get everyone outside and call the gas utility or 911. For electric and induction units, turn off the breaker before cleaning, and stop using any cracked glass top. During the visit we test igniters, switches, elements and boards and quote the repair before starting.