My Kenmore washer fills but won't spin. What is wrong?

On Whirlpool-built top-loaders, a failed lid switch or worn drive coupler is a common cause. On front-loaders, a door lock or drain pump issue may stop the spin. Knowing the model prefix helps narrow it down.

Do you repair stacked washer-dryers in condos near SouthPark mall?

Yes. Stacked and compact pairs are common in those buildings, and we can usually work on them where they sit or after separating the units. Let us know about building check-in or parking rules when you book so the visit starts on time.

The shutoff valve behind my Cotswold washer is stuck. Can you still replace the hoses?

We can often work around it, but a valve that will not close may mean the water has to be shut off at the main. Valve replacement itself is plumbing work. We will tell you what we find and whether a plumber should handle the valve before the new hoses go on.

Kenmore Repair

Kenmore Washer Repair in SouthPark & Cotswold, NC

Kenmore washer repair in SouthPark & Cotswold, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Washers: What We Check First

Kenmore washers came from Whirlpool, LG and Frigidaire. The model prefix 110 usually means a Whirlpool-built top-load or front-load washer, 796 points to LG, and 417 to Frigidaire front-loaders. Top-load Kenmore washers from Whirlpool are especially common in older homes, and many are still running. Front-load Kenmore Elite washers were often LG-built. Laundry pairs from Sears were often sold as matched sets, so the dryer beside the washer may share the same maker and the same model prefix.

Lid switch failure on Whirlpool-built top-loaders stopping spin
Drive coupler worn on older direct-drive Kenmore top-loaders
Drain pump clogged on LG-built front-load Kenmore Elite washers
Front-load door boot mildew and bearing noise as machines age

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore washer repair guide.

Closet Laundry, Old Valves and Condo Stackables

Cotswold and Montclaire ranch homes often tuck the washer into a hall closet, the kitchen or a room off the carport. Those spots tend to have the original shutoff valves, and a valve that will not close fully makes even a simple hose change harder. In condos around SouthPark, a stacked or compact washer that leaks can reach the unit below, so a drip under the machine deserves attention right away.

Front-loaders throughout the area struggle with summer humidity. Water left in the door boot and detergent drawer breeds mildew, and the musty smell is often the first complaint. Leaving the door cracked between loads and wiping the boot fold helps more than any cleaning product.

Safe Checks and the Technician's Visit

If the washer will not drain or spin, unplug it, then open the pump filter panel on a front-loader with towels ready, since debris trapped there is a frequent cause. Look behind the machine for a kinked drain hose too. When we arrive, we test the pump, lid switch or door lock and the drive components, explain what failed and quote the price. In a tight closet the machine may need to come fully out, so clear a path if you can.