My Roper burner clicks but never lights. What should I check?

With the stove off and cool, make sure the burner cap is seated correctly and the ports are clear. Look at the igniter tip for cracks or crusted food. If everything looks clean and it still will not light, the igniter or wiring may need replacing.

Can you replace a scorched burner receptacle on an older stove in my west-side duplex?

Yes. A scorched receptacle is a common, inexpensive repair, and we usually replace the matching element at the same time because a damaged element often caused the burn. Keep that burner off and the breaker off until the repair is done.

Do you repair basic gas stoves in older West Charlotte rentals?

We do. Igniters, oven valves, burner heads and thermostats on common gas stoves are well within our work. We do not touch the gas supply line itself, and we tell the landlord if the stove's age makes replacement the smarter choice.

Roper Repair

Roper Stove Repair in West Charlotte, NC

Roper stove repair in West Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Stoves: What We Check First

A Roper gas stove pairs four sealed or open burners on top with a gas oven below, all built on basic Whirlpool hardware. Ignition is electric on most models still in use: turning any burner knob closes a spark switch, which signals a spark module to fire every igniter at once. Some very old Ropers may still use standing pilots, which behave differently and need their own approach. Simple as the system is, small things like spills or a misplaced cap can stop it from working.

Clogged burner ports or crusted igniter stopping ignition
Wet spark switch behind the knob causing constant clicking
Yellow or lifting flames from dirty or misaligned burner parts
Failed spark module leaving every burner silent

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper stove repair guide.

Basic Stoves That Have Seen Heavy Use

In duplexes and older rental homes off Freedom Drive and Wilkinson Boulevard, the stove is often a simple electric coil model or a basic gas unit with standing burners and a single oven. Those stoves are durable, but the knobs crack, coil receptacles scorch, oven door hinges sag and the bake element eventually burns out. On gas units, slow oven ignition and burners that light unevenly are the usual signs of wear. Because these designs are common, most parts are easy to get, and a repair often costs far less than buying and delivering a new stove.

Before the Visit and During It

Turn off the breaker before inspecting an element, and do not use a burner whose receptacle is blackened or loose. For gas stoves, never adjust the supply connection, and if you smell gas, leave and call the gas utility or 911. When the technician arrives, we test each burner, the oven heating part and the switches, then give the owner the diagnosis and price for approval.