My Clover washer leaves rust stains on white clothes. Is the washer rusting?

Usually not. Iron in well water often causes those stains. Check the drum for chipped spots, and if it is intact, a water filter or treatment is the likely fix rather than a washer repair.

Our Lake Wylie front-loader smells after sitting closed for a few weeks. Can that be fixed?

In many cases, yes. Cleaning the door boot, the dispenser and the drain pump filter, then running a cleaning cycle, removes most odors. If mildew has damaged the boot, we can replace it.

ProFix Appliance Repair Charlotte service van and technician in front of the Charlotte skyline

Home/York County/Clover & Lake Wylie/Washer Repair

Washer Repair in Clover and Lake Wylie, SC

Clover's long-serving top-loaders and Lake Wylie's front-load machines fail for different reasons. We diagnose both across the 29710 ZIP code and quote the repair before any work begins. We cover ZIP 29710 in Clover & Lake Wylie.

1 ZIP

Coverage

York County

90-Day

Parts Warranty

30-Day

Labor Warranty

Call (980) 588-8688 Book Online Now

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

Well water and slow fills around Clover

On properties with private wells outside Clover, sediment and iron reach the washer's inlet valve, where small mesh screens catch them. Over time those screens clog and the machine fills slowly, stalls or throws a fill error. Iron can also leave rust-colored spots on light loads, which is a water condition rather than a washer fault.

To check the screens, turn off both supply valves, unscrew the hoses at the back of the washer and look inside the inlet ports. If they are packed with grit, they can be rinsed carefully. If the valve itself is damaged, it should be replaced.

Front-loaders in Lake Wylie homes

A front-load washer closed up between weekend visits is a mildew magnet in this humidity. The door boot and dispenser drawer grow black spots, and stale water in the drain pump filter starts to smell. Leave the door and drawer ajar when you leave, and clean the boot and pump filter regularly. If the washer leaks, stops mid-cycle or will not spin, we test the pump, the motor and the controls and give you the price first.

Before You Book: Washer Checks

Safe first steps for the most urgent washer problems, and when to leave it to a technician.

Leaking WaterSafety: Turn off both supply valves behind the washer, unplug it, and look for drips at the hose connections and around the drain hose before running another load.
Overfilling with WaterSafety: Turn off both supply valves immediately and unplug the washer; if water still enters with the power off, the valve is stuck.
Burning Smell from WasherSafety: Turn the washer off, unplug it or switch off the breaker, and do not use it again until it is inspected.
Leaking from BottomSafety: Turn off the water, unplug the washer and check that the pump filter cap is tight if your model has one.

Symptoms, causes and repair-or-replace advice for every type of washer are in our complete washer repair guide.