Where is the drain filter on an Asko washer?

It sits behind a small hatch at the lower front of the machine. Unplug the washer, put down towels and a shallow pan, and open the trap slowly because water will come out. Clear any debris, then close it firmly so it does not leak on the next cycle.

My Clover washer leaves rust stains on white clothes. Is the washer rusting?

Usually not. Iron in well water often causes those stains. Check the drum for chipped spots, and if it is intact, a water filter or treatment is the likely fix rather than a washer repair.

Our Lake Wylie front-loader smells after sitting closed for a few weeks. Can that be fixed?

In many cases, yes. Cleaning the door boot, the dispenser and the drain pump filter, then running a cleaning cycle, removes most odors. If mildew has damaged the boot, we can replace it.

Asko Repair

Asko Washer Repair in Clover & Lake Wylie, SC

Asko washer repair in Clover & Lake Wylie, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Asko Washers: What We Check First

Asko washers are compact front-loaders, usually 24 inches wide and designed to stack under a matching dryer. They use a stainless steel drum and a suspension built around shock absorbers inside a sturdy frame, which helps them stay steady at high spin speeds in a closet or upstairs laundry room. That solid build tends to push failures toward the parts that see constant small wear rather than toward the drum or frame.

Pump trap clogged with coins, lint and small clothing
Door lock or lock switch failing to engage or release
Shock absorbers worn, causing loud spins and walking
Door boot mildew from humidity and closed doors

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Asko washer repair guide.

Well water and slow fills around Clover

On properties with private wells outside Clover, sediment and iron reach the washer's inlet valve, where small mesh screens catch them. Over time those screens clog and the machine fills slowly, stalls or throws a fill error. Iron can also leave rust-colored spots on light loads, which is a water condition rather than a washer fault.

To check the screens, turn off both supply valves, unscrew the hoses at the back of the washer and look inside the inlet ports. If they are packed with grit, they can be rinsed carefully. If the valve itself is damaged, it should be replaced.

Front-loaders in Lake Wylie homes

A front-load washer closed up between weekend visits is a mildew magnet in this humidity. The door boot and dispenser drawer grow black spots, and stale water in the drain pump filter starts to smell. Leave the door and drawer ajar when you leave, and clean the boot and pump filter regularly. If the washer leaks, stops mid-cycle or will not spin, we test the pump, the motor and the controls and give you the price first.