My washer on a Kannapolis back porch stopped filling after a cold snap. What happened?

A supply line or the washer's inlet valve may have frozen and cracked. Turn off the water, check the hoses for splits and let the area warm. We can test and replace the valve and suggest ways to protect the lines next winter.

Is an older top-load washer in my Kannapolis house worth repairing?

Often, yes. Older top-loaders are mechanically simple, and common failures like a lid switch, belt or coupler are reasonable repairs. We give you the price first so you can compare it with replacing.

ProFix Appliance Repair Charlotte service van and technician in front of the Charlotte skyline

Home/Cabarrus County/Kannapolis/Washer Repair

Washer Repair in Kannapolis Homes

Laundry hookups in many Kannapolis houses were added later, on a back porch or in a converted closet. ProFix repairs washers wherever they sit, sorting out drain, spin, fill and leak problems with the price given first. We cover 2 ZIP codes in Kannapolis.

2 ZIPs

Coverage

Cabarrus County

90-Day

Parts Warranty

30-Day

Labor Warranty

Call (980) 588-8688 Book Online Now

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

Porch hookups, old standpipes and simple machines

When a washer in an older Kannapolis home will not drain, the machine is not always to blame. Drain hoses here often empty into a standpipe or laundry sink that has been in place for decades and is partly clogged with lint. A porch hookup also leaves the supply lines exposed, and during an ice storm a line can freeze and split. Check the standpipe and hoses before assuming the pump has failed.

Many of those homes still run a classic top-load washer, and those are often very repairable. A machine that fills but will not agitate or spin may need a lid switch, coupler, belt or drive part rather than a whole new washer. Newer front-loaders in recent subdivisions bring different issues: door locks, door boot mildew from humid summers and pumps clogged by coins or socks.

Before calling, unplug the washer, close the supply valves, and look for kinks or a hose pushed too far down the standpipe. The technician then runs a test cycle, finds the failed part, and quotes the repair before replacing anything. Every repair carries a 90-day parts and 30-day labor warranty.

Before You Book: Washer Checks

Safe first steps for the most urgent washer problems, and when to leave it to a technician.

Leaking WaterSafety: Turn off both supply valves behind the washer, unplug it, and look for drips at the hose connections and around the drain hose before running another load.
Overfilling with WaterSafety: Turn off both supply valves immediately and unplug the washer; if water still enters with the power off, the valve is stuck.
Burning Smell from WasherSafety: Turn the washer off, unplug it or switch off the breaker, and do not use it again until it is inspected.
Leaking from BottomSafety: Turn off the water, unplug the washer and check that the pump filter cap is tight if your model has one.

Symptoms, causes and repair-or-replace advice for every type of washer are in our complete washer repair guide.