Where is the drain filter on an Asko washer?

It sits behind a small hatch at the lower front of the machine. Unplug the washer, put down towels and a shallow pan, and open the trap slowly because water will come out. Clear any debris, then close it firmly so it does not leak on the next cycle.

My washer in Midland shows a fill error right after our well pump was replaced. Is it broken?

It may just be clogged. Well work often stirs up sediment that lodges in the washer's inlet screens. Clean those first, and if the error continues, we test the inlet valve and controls.

Can iron in my Mount Pleasant well water damage my washer?

Iron mainly stains clothes and the tub and can contribute to valve wear over time. We can replace affected parts and clean the screens. Treating the water itself is the job of a water treatment specialist.

Asko Repair

Asko Washer Repair in Midland & Mount Pleasant, NC

Asko washer repair in Midland & Mount Pleasant, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Asko Washers: What We Check First

Asko washers are compact front-loaders, usually 24 inches wide and designed to stack under a matching dryer. They use a stainless steel drum and a suspension built around shock absorbers inside a sturdy frame, which helps them stay steady at high spin speeds in a closet or upstairs laundry room. That solid build tends to push failures toward the parts that see constant small wear rather than toward the drum or frame.

Pump trap clogged with coins, lint and small clothing
Door lock or lock switch failing to engage or release
Shock absorbers worn, causing loud spins and walking
Door boot mildew from humidity and closed doors

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Asko washer repair guide.

Sediment, iron and the inlet valve

A washer on a private well pulls in whatever the well delivers, including fine sand, sediment and iron. That material collects in the small screens inside the hose connections and the inlet valve, so the machine fills slowly, stops with a fill error or never reaches the right water level. Iron can also leave orange stains on the tub and clothes. After well work or a pump replacement, a burst of sediment can clog things all at once.

Turn off both water valves and unplug the washer before checking anything. Unscrew the fill hoses and look at the screens where they attach to the machine. If the hoses are original rubber, replacing them with braided lines is a sensible precaution, especially in a utility room off the garage where a leak might go unseen.

The technician cleans or replaces screens and valves, tests the pump, lid or door lock and drive system, and quotes before repairing. A sediment filter on the well, installed by a water treatment company, helps protect the new parts. Our washer repairs come with a 90-day parts and 30-day labor warranty.