My Maytag Bravos washer won't spin. What should I check?

First make sure the lid is fully closed and nothing is blocking the lock. A slow drain can also prevent spin, so check for a kinked drain hose. If those are fine, the lid lock, belt or drive components may need testing.

My washer in Midland shows a fill error right after our well pump was replaced. Is it broken?

It may just be clogged. Well work often stirs up sediment that lodges in the washer's inlet screens. Clean those first, and if the error continues, we test the inlet valve and controls.

Can iron in my Mount Pleasant well water damage my washer?

Iron mainly stains clothes and the tub and can contribute to valve wear over time. We can replace affected parts and clean the screens. Treating the water itself is the job of a water treatment specialist.

Maytag Repair

Maytag Washer Repair in Midland & Mount Pleasant, NC

Maytag washer repair in Midland & Mount Pleasant, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Maytag Washers: What We Check First

Maytag washers are the brand's best-known products. Current models are on Whirlpool platforms and include top-loaders with agitators or impellers, such as the Bravos line, plus front-load washers. Many top-loaders lock the lid during agitation and spin and use a drive belt or coupling with a gearcase and shifter. Maytag adds features such as Extra Power and Deep Fill, and some models carry a longer limited warranty on certain parts. Older pre-2006 Maytag machines, including Neptune front-loaders, are a different design.

Lid lock motor or switch failure halting the cycle
Drive belt or coupling worn, no agitation or weak spin
Drain pump jammed by small items, water left in tub
Suspension springs or dampers worn, tub banging during spin

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Maytag washer repair guide.

Sediment, iron and the inlet valve

A washer on a private well pulls in whatever the well delivers, including fine sand, sediment and iron. That material collects in the small screens inside the hose connections and the inlet valve, so the machine fills slowly, stops with a fill error or never reaches the right water level. Iron can also leave orange stains on the tub and clothes. After well work or a pump replacement, a burst of sediment can clog things all at once.

Turn off both water valves and unplug the washer before checking anything. Unscrew the fill hoses and look at the screens where they attach to the machine. If the hoses are original rubber, replacing them with braided lines is a sensible precaution, especially in a utility room off the garage where a leak might go unseen.

The technician cleans or replaces screens and valves, tests the pump, lid or door lock and drive system, and quotes before repairing. A sediment filter on the well, installed by a water treatment company, helps protect the new parts. Our washer repairs come with a 90-day parts and 30-day labor warranty.