My Roper burner clicks but never lights. What should I check?

With the stove off and cool, make sure the burner cap is seated correctly and the ports are clear. Look at the igniter tip for cracks or crusted food. If everything looks clean and it still will not light, the igniter or wiring may need replacing.

Is an older coil-top stove in a Cotswold ranch worth repairing?

Usually, yes, because elements, receptacles and switches for common models are widely available and simple to replace. The decision shifts only if several major parts fail at once or the oven cavity itself is damaged, and we will tell you if that is the case.

My gas stove's oven takes forever to light. What is wrong?

A weakening oven igniter is the most likely cause, because it must glow hot enough to open the gas valve and a tired one takes longer each time. We test its current draw and replace it if needed. If you ever smell gas while waiting, turn the oven off and leave the house.

Roper Repair

Roper Stove Repair in SouthPark & Cotswold, NC

Roper stove repair in SouthPark & Cotswold, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Stoves: What We Check First

A Roper gas stove pairs four sealed or open burners on top with a gas oven below, all built on basic Whirlpool hardware. Ignition is electric on most models still in use: turning any burner knob closes a spark switch, which signals a spark module to fire every igniter at once. Some very old Ropers may still use standing pilots, which behave differently and need their own approach. Simple as the system is, small things like spills or a misplaced cap can stop it from working.

Clogged burner ports or crusted igniter stopping ignition
Wet spark switch behind the knob causing constant clicking
Yellow or lifting flames from dirty or misaligned burner parts
Failed spark module leaving every burner silent

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper stove repair guide.

Older Freestanding Stoves in Ranch Kitchens

A freestanding stove that has served a Cotswold kitchen for years usually fails one part at a time. On electric models, a coil element burns out, its receptacle scorches or an infinite switch stops regulating heat, so a burner is either off or stuck on high. On gas stoves, burners that will not light or an oven that stays cold often trace to an igniter weakening with age. Some condos near the mall also have basic electric stoves supplied by the building, and the same parts wear out there.

Checking a Burner Safely and Planning the Repair

Turn off the breaker before lifting out a coil element, then swap it into a working burner position to see whether the element or the switch is at fault. Do not use a receptacle that looks burned. For gas stoves, never adjust the supply; if you smell gas, leave the house and call the gas utility or 911. We test the elements, switches, igniter and oven sensor and tell you the price first. Parts for common older stoves are usually easy to find.