My DCS cooktop keeps clicking even when the burner is off. Why?

This usually means moisture or a fault in a switch or spark module. Let the cooktop dry completely after cleaning. If it continues, a burner valve switch or module may need replacement.

The touch controls on our Steele Creek cooktop stopped responding. What should we try?

Wipe the control area dry, since moisture or a pot resting on the panel can block the touch sensors, and check whether a lock mode is on. Then reset the breaker once. If the controls still do not respond, the touch board or main control needs testing.

Our hot-surface light stays on even when the cooktop is cold. Is that a problem?

It is a fault worth fixing, because the light is a safety indicator. The cause is usually a failing sensor, relay or control board. Switch the cooktop off at the breaker if any element seems to be heating on its own.

DCS Repair

DCS Cooktop Repair in Steele Creek, NC

DCS cooktop repair in Steele Creek, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

DCS Cooktops: What We Check First

DCS cooktops and rangetops are built-in gas cooking surfaces with heavy grates and sealed burners. Many have automatic reignition: each burner has an electrode and a spark module that senses when the flame goes out and relights it. Rangetops often include a griddle or grill section with its own burner and thermostat. Because they are fixed into the counter, access for service is from above or through the cabinet below.

Reignition module clicking constantly after spills or cleaning
Cracked electrode insulator preventing a strong spark
Misaligned burner cap causing weak or uneven flames
Griddle thermostat failure causing uneven heating

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our DCS cooktop repair guide.

Smooth-Top and Gas Cooktops in Newer Floor Plans

Larger floor plans in Steele Creek's newer subdivisions sometimes trade a range for a counter cooktop paired with a wall oven, while most homes have the cooktop as the top of a slide-in or freestanding range. Either way, the surface is usually glass with radiant elements and electronic controls, or sealed gas burners with electronic ignition.

Radiant elements can stop heating or stay on, touch controls can lock up after spills or a power surge, and a hot-surface light may stay lit because of a failing sensor or relay. On gas tops, spark igniters soaked by boil-overs click without lighting. Glass surfaces also crack from impact, and a cracked top should not be used.

Let the surface cool, clean it with cooktop cream, and check whether a control lock is engaged. If you notice a gas odor, leave and call the gas utility or 911. We test elements, switches and controls, price the repair first, and mention it if warranty coverage looks likely.