All my Dacor burners click when I turn one knob. Is that normal?

Yes, on many gas cooktops every igniter sparks together when any burner is lit, then stops once the flame is established. Constant clicking after the flame catches is not normal. That usually means moisture in a switch or a failing switch or module.

One coil burner on my West Charlotte rental's stovetop only works on high. Can that be fixed?

Yes. That symptom almost always points to a failed infinite switch, the control behind the knob that cycles the element. It is an inexpensive part on most common ranges. The owner or manager should book the visit, and we confirm it before replacing anything.

My smooth glass cooktop has a crack. Is it still safe to use?

Stop using it and turn off the breaker, because a cracked top can expose live parts to spills. The glass can often be replaced on its own, but on an older range that may cost a large share of a new one, so we will help you compare.

Dacor Repair

Dacor Cooktop Repair in West Charlotte, NC

Dacor cooktop repair in West Charlotte, Mecklenburg County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Dacor Cooktops: What We Check First

Dacor builds cooktops in two very different technologies. The gas models use sealed burners with electronic spark ignition, often with lit control knobs, and they range from 30-inch units to wide professional-style rangetops. The induction models use copper coils under a glass surface, driven by power electronics that create a magnetic field to heat the pan directly. A clicking gas burner and a dead induction zone have almost nothing in common, so the first step is knowing which you own.

Moisture in a spark switch causing nonstop burner clicking
Cracked ceramic igniter leaving one gas burner unlit
Induction cooling fan blocked, triggering overheat shutdowns
Induction power board failure following a storm surge

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Dacor cooktop repair guide.

Burners That Quit or Won't Turn Down

Coil-top cooking surfaces remain common in older west-side homes and rental units. When a coil stays cold, the element, its receptacle or the infinite switch behind the knob is at fault, and a burner that only works on high almost always has a failed switch. Smooth glass tops in renovated Wilmore and Ashley Park kitchens can develop a dead radiant element or a hot-surface light that never goes off. Gas tops show different symptoms: a burner that clicks and never lights, or a flame that is yellow and uneven because spilled food has blocked the burner ports.

A Safe First Check and the Repair

Turn off the breaker before pulling a coil element, then swap it with a working one to see whether the problem follows the element. On gas, clean and dry the burner cap and base and reseat them, but do not touch the supply line. Leave and call the gas utility or 911 if you smell gas. We test the element, switch, receptacle or igniter and price the repair before ordering.