Why does my JennAir stove keep clicking after I turn the burner off?

Usually moisture or residue is shorting the ignition circuit at a burner switch or electrode. Turn the stove off, let it dry for a day, and clean around the burner. If it keeps clicking, the switch may need replacement, which is a straightforward repair.

One burner on our Fort Mill gas stove has a yellow flame. Should I keep using it?

A lazy yellow flame often means the burner cap is not seated, the ports are partly blocked or the air mix is off. Turn it off, let it cool, then clean and reseat the cap. If the flame stays yellow or leaves soot on pans, stop using that burner and book a visit.

Can you repair an older stove that came with a resale home in Tega Cay?

Yes. Older stoves are often simpler to fix, with switches and igniters that are straightforward to replace. We check parts availability for the model and tell you honestly whether the repair is worth it compared with a new unit.

JennAir Repair

JennAir Stove Repair in Fort Mill & Tega Cay, SC

JennAir stove repair in Fort Mill & Tega Cay, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

JennAir Stoves: What We Check First

On a JennAir stove, the cooking surface is where most daily wear happens. Gas models use sealed burners with brass or aluminum caps and an electronic spark ignition system, often with dual-stacked burners that can simmer very low. Electric and induction stoves use radiant elements or coils under a glass top. Some older JennAir stoves also have a built-in downdraft vent between the burners, which brings its own blower and filter into the picture.

Spark electrode fouled by spills, causing constant clicking on gas burners
Spark module or burner switch failure preventing ignition
Clogged or misaligned burner caps producing weak, uneven flames
Radiant element or switch failure leaving one electric burner cold

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our JennAir stove repair guide.

Burner problems on everyday stoves

Plenty of Fort Mill households call the freestanding cooking appliance a stove, and the complaints that bring us out are usually on top: a gas burner that clicks but will not catch, a flame that burns yellow or lifts off the ports, or an electric element that heats only on high. Each traces to a small number of parts, and many are fixable on the same visit when the part is on hand.

For gas, pull the grate and cap, clear the ports with a straight pin and let everything dry fully, since boil-overs are a frequent reason a burner will not light. For a coil-top electric, turn the stove off, let the coil cool and reseat it firmly in its receptacle. A scorched or loose receptacle needs replacing, and that is better done by a technician than patched.

Gas safety and the visit itself

If a gas smell does not clear after a burner is turned off, leave the home and call the gas utility or 911 from outside. We do not work on gas supply lines, but we do test igniters, spark modules, valves, infinite switches and wiring inside the stove. The technician explains the fault, prices the repair before starting and backs it with our 90-day parts and 30-day labor warranty.