Why does my Amana washer lid lock keep blinking?

A blinking lid lock light usually means the washer cannot confirm the lid is locked. Something may be blocking the latch, or the lock assembly may have failed. Check for obstructions first, then have the lock tested.

My upstairs washer in Harrisburg leaked through the ceiling. Should I stop using it until you come?

Yes. Shut off the water valves behind the washer, unplug it and leave it off until it has been checked. Running another load can push more water into the subfloor, and we need to see the leak point anyway to find the cause.

Can you replace the supply hoses while you are at my Concord home?

We can, and if your hoses are the original rubber ones we may suggest braided replacements. The cost is quoted along with the main repair before any work. Many owners in newer subdivisions have never changed theirs.

Amana Repair

Amana Washer Repair in Concord & Harrisburg, NC

Amana washer repair in Concord & Harrisburg, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Amana Washers: What We Check First

Most Amana washers are top-loaders with either a traditional agitator or a low-profile impeller, built on Whirlpool's top-load platforms. Older models used Whirlpool's classic direct-drive design with a motor coupler, while newer ones use a belt-driven gearcase with an electronic shifter and a lid lock that holds the lid closed during spin. Controls are usually simple dials and buttons.

Lid lock failure preventing spin or stopping mid-cycle
Electronic shifter fault blocking the change from agitate to spin
Drain pump clogged with socks, coins or lint
Worn motor coupler on older direct-drive top-loaders

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Amana washer repair guide.

When the laundry room sits over the living room

In a two-story house in one of the newer subdivisions, a slow washer leak can show up first as a stain on the ceiling below. Common sources are a torn front-loader door boot, a cracked fill hose, a loose drain hose at the standpipe, or a pump seal that has started to weep into the drain pan.

If you notice water, turn off both supply valves behind the machine and unplug it before anything else. Check whether the drain pan is holding water and look at the door boot for tears or a sock caught in the folds. Front-loaders in our humid summers also grow mildew in the boot and dispenser if the door stays shut, which is an easy fix: leave it cracked between loads.

During the visit, the technician runs a test cycle, checks the pump, the lid or door lock, the drive components and the hoses, and explains what failed and what the repair costs before starting. Older top-loaders in established Concord neighborhoods are often very repairable, and we will say so when a fix is the smarter spend.