Why is there water sitting in the bottom of my Electrolux dishwasher?

Usually the filter is clogged or something is jammed in the drain pump. Check and rinse the filter first. If the water still doesn't drain, the pump, drain hose or garbage disposal connection needs to be checked.

After a thunderstorm my Harrisburg dishwasher's lights flash and it won't start. What should I do?

Turn off its breaker for a full minute, then restore power and try a short cycle. Many controls recover from a surge that way. If the error returns, a board or sensor may have been damaged, and we can test it during a visit.

Do you repair dishwashers in Concord townhomes where the unit is tight under the counter?

Yes. We slide the dishwasher out carefully to reach the water line, drain and wiring, then reset and level it when the repair is done. If the mounting brackets or the water connection are part of the problem, we point that out too.

Electrolux Repair

Electrolux Dishwasher Repair in Concord & Harrisburg, NC

Electrolux dishwasher repair in Concord & Harrisburg, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Electrolux Dishwashers: What We Check First

Electrolux dishwashers sit on a platform closely related to Frigidaire's higher-end models. They use a stainless tub, a filter assembly under the lower spray arm, a circulation pump with an attached heater on many versions, and a separate drain pump. Controls are usually hidden in the top edge of the door, and many models have features like a scrubbing zone at the back of the lower rack or adjustable spray patterns.

Drain pump impeller jammed by glass or food debris
Door latch switch failure preventing the cycle from starting
Hidden top touch controls unresponsive from moisture intrusion
Clogged filter or spray arm holes causing poor wash results

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Electrolux dishwasher repair guide.

Drains, disposers and storm-tripped controls

Most dishwashers here drain through the garbage disposer or a high loop under the sink. A disposer installed without its knockout plug removed, a clogged air gap, or a drain hose kinked behind the cabinet will leave water in the tub. Inside the machine, the filter at the bottom collects food and glass bits, and a neglected one causes poor cleaning long before anything breaks.

Concord and Harrisburg homes on city water rarely deal with the sediment that wells bring, but summer thunderstorms are another matter. A flicker of power can leave a newer dishwasher frozen mid-cycle or flashing an error. Turn the dishwasher's breaker off for a minute, turn it back on, and run a short cycle. Clean the filter while you wait.

If that does not clear it, the technician tests the drain pump, inlet valve, heater, door latch and control board. Builder-grade dishwashers in newer subdivisions are generally worth repairing when the problem is a pump or valve, and we will tell you when a cracked tub or a failed board on an older model points toward replacement instead.